For my 2016 Precept 31UL got a Winegrad Carryout G2 ($399), two ViP211Z ($49 each) and was concerned about how to hook-up, Jayco would send only a brochure for the Connex 4X4 HDMI.... So I saw that the Connex only had the DVD as input to A with BCD open and was designed to run that signal by CAT 5/6 to the three TVs.... I put the dish 12V power supply cable and a flat RG6 X 6 inches cable (2 for $4) out the driver side salon window to the antenna and RG cable into Satellite receiver with it's HDMI output to the Connex B input.... Select the B input on the Connex and HDMI input on any of the TVs, DONE... Now to clean up cable on inside and subscribe to service.. The G2 will work with DIRECTV, DISH and BELL..