Picture 2 of 10 from Album Tri-Metric 2025-RV installation
This is the back side of the meter, inside the entertainment center. I used the material I cut out of the hole I made as shims to flush mount the meter to the wall. I drilled a small hole the diameter of my 4-22 wire to run it out the back of the case. I then ran this wire down through the entertainment center out the back of the entertainment center and through a hole I had drilled in the floor for a past install. The wire then ran under the floor in the sealed in undercarriage and came back up through the hole I drilled in the front cubby compartment where I located my shunt.
Picture Added 05-29-2014 07:42 AM Added by Big Sky