Jayco RV Owners Forum
 


Picture 1 of 10 from Album Tri-Metric 2025-RV installation
One of a few port holes I've carved on the bottom of my TT to help pull wire.  Then button it back up with a piece of wood on the inside and wood screws to keep the flap shut and the little creatures out.  I took this photo so you could see how the wires from the shunt come back outside just below the diamond plate.  The factory actually has a set of wires just to the side of these coming through the same barrier.
One of a few port holes I've carved on the bottom of my TT to help pull wire. Then button it back up with a piece of wood on the inside and wood screws to keep the flap shut and the little creatures out. I took this photo so you could see how the wires from the shunt come back outside just below the diamond plate. The factory actually has a set of wires just to the side of these coming through the same barrier.
Picture Added 06-01-2014 01:16 AM
Added by Big Sky

All times are GMT -6. The time now is 08:00 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.