Jayco RV Owners Forum
 


Picture 11 of 12 from Album Replacing my IOTA ILC-3045 with Magnum Energy MSH-3012M Hybrid
If you remove the undercarriage service cover on my 26 BHS near the entrance of the TT, you'll have access to the slide motor.  This also gives you a clear view of your freshwater tank and the wiring & propane as it enters the interior of the TT just under the oven, behind the load center.  Seeing the propane copper tube protruding along side the water tank, leaving about a 2-3" gap between the exterior wall and the water tank, I decided to drill a 1 1/4" hole, just behind the propane tube and fished romex to and from the inverter/charger location to the load center location.
If you remove the undercarriage service cover on my 26 BHS near the entrance of the TT, you'll have access to the slide motor. This also gives you a clear view of your freshwater tank and the wiring & propane as it enters the interior of the TT just under the oven, behind the load center. Seeing the propane copper tube protruding along side the water tank, leaving about a 2-3" gap between the exterior wall and the water tank, I decided to drill a 1 1/4" hole, just behind the propane tube and fished romex to and from the inverter/charger location to the load center location.
Picture Added 07-20-2014 10:57 PM
Added by Big Sky

All times are GMT -6. The time now is 01:48 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.