Have two 30lb. propane tanks. The connection to the hose from regulator is pressed up against the tanks creating a crimp in the hose. Found one side is now leaking. How can we re-adjust the connection so it doesn't press up against the tank. It is very tight space, with very little room to move anything. Can we use some sort of angle connection to prevent the hose from crimping?
Ordered our 2018 NP 381DLQS 4/11 it came offline 6/1 Dealer just informed us it'll arrive to them on 6/8. Just have to set up a date/time for our PDI. After moving everything over into the new FW we'll take it to a close to home campground to organize & try everything out.
