Similar Problem
Responded in another forum, but wanted to also support this forum. We had a similar problem on our Jayco Melbourne 29D motorhome. The slideout seal has a tiny slit that runs along the side of the seal, and attached to the slideout frame is an apparatus that looks like wire lace with tiny fingers, something like, but smaller than, paperclips, that fit in the tiny slit. The seal/gasket had pulled away from the wire "lace" fingers; I did the best I could to reinsert the fingers into the gasket, and was mostly successful, then applied a bead of silicone to overlap the gasket and the slideout frame, attempting to "glue" the gasket to the frame. So far it has worked, but only time will tell. Only other option I can envision is to pull the slide and replace the entire gasket. Hope this helps
|