Garage beds

[advrider]

My power beds in the garage have stopped working. Last used Sept last year
went to use them today wouldn't work. The light on the switch in the control
panel is not on when swithch is turned on. Checked the fuse it is a 20 amp
automatic so I switched the one from the slides to the cargo room location and
still no light and still not working. I didn't have my volt meter with me so
couldn't check for voltage at switch. Any suggestion as a possible problem
with it, that I could check for?

Jack

[slaw32]

make sure to check connections on motor that operates the bed. had an issue with the same thing to start season . I wiggled connections at motor and has worked fine since

[Rotocleaner1]

Possibly bad master switch to garage, pull panel and see if you have power to the switch. Hope that helps.

[advrider]

No power to the cargo bay switch how do you or can you check
to see if an auto reset 20 amp fuse is working?


Jack

[newbold1]

unhrg nghhgjnnnn

[newbold1]

Originally Posted by newbold1

unhrg nghhgjnnnn

Not sure what happened here. Maybe a butt post like a butt dial on the cell phone?

LOL