Quick question!!
Got a spare battery and was hooking it up, I noticed more than expected sparks. I had opened up the front box and assured I had correct polarity and remarked the unmarked wires. I used ohm meter and tested and got nearly a dead short. I changed meter and tested 11 amp draw.
Everything was off, even lights.
I disconnected the 115 v power, no change. I disconnected the Tow vehicle. No change.
I pulled every 12v fuse in the box, still drawing 11 amps.
When all else fails, I looked at the owners manual and didn't see anything about unexpected circuits.
I'm now going to disconnect some of the things connected to the positive battery junction box to the wire nut with the positive lead.
Is there a 115v inverter that comes on automatically when you connect power? I guess there is but I don't see a switch for it.
Advice?
|