Pinbox on 2012 31.5FBHS

[iowahank]

Does anyone know what model pinbox comes on a 2012 31.5FBHS? There is a sticker with some numbers that Lippert has never heard of and a call to Jayco basically got me their internal part number. I'm looking to swap the stock pinbox for a MorRyde or TrailAir if I can figure out what the part number is. Otherwise it's get out the measuring tape...

[3'senough]

Since Mor Ryde is an option maybe Jayco can provide the Mor Ryde replacement that they install on the unit. Just an idea.

[iowahank]

Got Jayco's part number for the MorRyde but customer service can't tell me the actual model number so I can't shop around for a good price. Guess I try my dealer next week...

[Panhead]

We have a 2012 31.5RLTS and I think the chassis and pin box would be the same on all of the 31.5 SuperLite trailers though I am not certain of this. In 2012 Jayco made several mid year model changes to the Superlite series of 5th wheels as well as Lippert purchasing the Dexter chassis division. If you have an early 2012 as we do I'd bet your pinbox is the same as ours. Our trailer chassis birth date is 7-22-11 and the pin box is a Dexter PN:221-0031-00. Shortly after this date Lippert purchased Dexters chassis division and I suppose things may have changed a short time after that. If you have a sticker on your pin box with a number like number above, that is your Dexter Pin Box part number.

To get your chassis information check the sticker on the outside, driverside frame rail at the very front near the landing legs. If you have a Dexter chassis the sticker will have a Dexter logo on it.

Hope this helps

Steve

[iowahank]

Thanks Panhead,
My born on date is 3/12 according to the sticker and the pinbox is definitely a Lippert.

[Panhead]

Originally Posted by iowahank

Thanks Panhead,
My born on date is 3/12 according to the sticker and the pinbox is definitely a Lippert.

Well it was worth a shot, sorry I couldn't be more help. If you like I could measure my pin box mount and take a picture of it to post.

Steve

[iowahank]

Thanks for the offer Panhead, but not necessary. I'll get some measurements of mine sometime this week, I have downloaded a page to plug in the numbers that then translates to a model number.