|
Fixed annoying dinette access
My 24RBS has a minor but annoying flaw where the center section of the dinette extends under the side cushions, so to access it you need to remove all the cushions from the back and the sides - 8 total. So in the center, I added 1 1/2 x 1 1/2" wood pieces to each end of the supports, and cut off the same amount from each end of the plywood. Attached the little cut off plywood pieces on top of the wood pieces to keep things level. Now the plywood base is short enough that only the back cushions need to be removed to access the hatch.
|
Linear Mode
