Have an 08 GH 31ss, and the PO had installed a water filter under the kitchen sink, water was tasting/smelling funky, so I removed the old filter and installed the piece of pipe shown in the picture. This piece of pipe was in the rig when I got it, and it fit in the space and water line fittings when the old filter was removed. Now I have a leak at these connections, and I've tighten them as tight as I dare before breaking them
Should there be washers or gaskets on both ends/connections of this pipe and the female connectors on the water line itself ? The old filter did not have any gaskets/washers that I remember.