|
01-16-2015, 01:43 PM
|
#1
|
Junior Member
Join Date: Jan 2015
Location: Saratoga Springs
Posts: 6
|
radio controls
New to Jayco and I'm sitting in Florida with my Octane 26Y with a question. Found out today that my outside speakers are on. I can't find a way to turn them off. Help.
Bill
|
|
|
01-16-2015, 02:23 PM
|
#2
|
Senior Member
Join Date: Feb 2012
Location: Clifton Park,NY
Posts: 337
|
If you have the Jensen head model that has a,b,c speaker buttons on it then push C and the speakers will turn off.
__________________
Chris
Chevrolet 2500 HD Crewcab
2013 Jay Flight 33 RLDS
|
|
|
01-16-2015, 02:28 PM
|
#3
|
Junior Member
Join Date: Jan 2015
Location: Saratoga Springs
Posts: 6
|
Sorry, should have added that. My head is a Sony with a remote. Haven't had any luck trying to figure it out, the book makes no mention, and the SONY paperwork doesn't say either.
|
|
|
01-16-2015, 03:06 PM
|
#4
|
Senior Member
Join Date: Mar 2013
Location: Kansas City
Posts: 1,710
|
Is that a factory installed head unit? See if the fader or balance does anything if so equipped.
__________________
2018 28BHBE
2017 Ford F250 XLT, 6.2 gasser
2013 26BH (traded)
|
|
|
01-16-2015, 06:53 PM
|
#5
|
Site Team
Join Date: Jan 2011
Location: James Island, SC
Posts: 22,772
|
Don't watch any X rated movies until you figger it out!
__________________
Moderator
2011- 351RLTS Eagle, MorRyde suspension/pin box,
2017- F350 6.7 PSD Lariat FX4,SRW, SB,CC
Hughes PWD SP-50A, TST TPMS
Gator roll-up bed cover
B&W Turnover ball, Companion Std hitch
Can't find what you're looking on JOF? Try Jayco Owners Forum Custom Google Search
|
|
|
01-16-2015, 09:05 PM
|
#6
|
Senior Member
Join Date: Feb 2012
Posts: 968
|
Along that line, I've got a factory installed Jensen stereo and that infernal BEEP every time you change the radio station goes through to the outside speakers even when they are turned off, and the loudness of the beep is not controlled by the volume. Does anyone have a fix for that?
|
|
|
01-17-2015, 07:05 PM
|
#7
|
Member
Join Date: Jul 2013
Posts: 54
|
Generally speaking, the inside speakers will be on either the front or rear channel, and the outside speakers will be on the opposite channel. Find the front/rear fade setting on the stereo and figure out which one it is.
|
|
|
01-20-2015, 06:25 AM
|
#8
|
Senior Member
Join Date: Feb 2012
Location: Clifton Park,NY
Posts: 337
|
Sorry I couldn't help you out Bill.
__________________
Chris
Chevrolet 2500 HD Crewcab
2013 Jay Flight 33 RLDS
|
|
|
01-20-2015, 08:20 AM
|
#9
|
Senior Member
Join Date: Jan 2011
Location: Vienna
Posts: 2,044
|
__________________
Joe Hinson
2010 Jayco Quest G2(SOLD)
2014 Jayco Eagle 33.5RETS
2007 Ram 2500 5.9L Cummins(SOLD)
2015 Ram 2500 6.7L Cummins 4WD
:)
|
|
|
01-22-2015, 07:53 PM
|
#10
|
Junior Member
Join Date: Jan 2015
Location: Saratoga Springs
Posts: 6
|
GIJOE, you called it. The fade control controls the outside speakers.
Thanks, Bill
|
|
|
01-24-2015, 08:37 PM
|
#11
|
Senior Member
Join Date: Jan 2015
Location: London
Posts: 100
|
Our Sony set up has a speaker selection switch near the Generator switch that will allow you to select inside or outside speakers.
Ross..
__________________
2015 Ram 3500 CTD SRW, Aisin, Longhorn Edition
2011 Octane T26Y
|
|
|
05-08-2017, 02:13 PM
|
#12
|
Junior Member
Join Date: May 2017
Location: Buffalo ny
Posts: 2
|
Outside speakers
Jayco Seismic 4212 2016
Is there a speaker selector or n mine. I know how to fade. I want to use the radio inside th living room to play on the speakers outside. Anyone know. I know about speaker selector a ,b, c
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|