Kitchen Sink Hot Water Line Leak at 90 degree connector

[lrhogusa]

Hello All

In my 2012 X23J Hybrid, I have a leak for the second time under the sink at the 90 degree elbow coupler connection in my hot water line going to the kitchen sink faucet. The connection is about 6 inches to the left.

Has anyone replaced and or repaired this connection yourself? I don't feel like having my camper tied up for a month at the camper garage again.

Thank You Everyone

[3'senough]

If it's pex you could either buy or borrow a tool to either tighten or install a new clasp.

http://www.amazon.com/Pex-Cinch-Clam...words=pex+tool

I am sure the local HD or L store has this for about the same or less.

[Brownie]

If there is enough slack in the line, you could cut off the PEX fitting and replace it with a "SharkBite" fitting. You won't need an expensive crimping tool. They just push on!

[lrhogusa]

Why thanks 3'senough and Brownie. Showed how easy the repair will be. The original clamps were new to me and never knew what pex pipe is. Cheers!