Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
Jayco RV Owners Forum
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 10-21-2014, 07:17 PM   #21
Senior Member
 
Join Date: Dec 2012
Location: Southern Indiana
Posts: 3,204
Here's a picture of the mount. It's a 4in. u clamp with 2 small steel plates with rubber on the underneath side to protect the bumper. On the connecting steel plates are 2 small clamps that hold 3/8in. allthread bent at 45* angle. I have 2 hollow metal tubes that I slip over the allthread for extra support. The all thread is very stable as the towel holder will hold 6 large wet towels. The frame is made of 3/4 in. pvc with holes drilled on the inside/outside for the nylon string/rope to feed through. I strung it before final assembly as it was a lot easier to tighten the rope as the pvc flexes. I'm sure there's an easier way to mount to the bumper, but I made it out of stuff I had in the garage.http://www.jaycoowners.com/forums/at...1&d=1413940593
Attached Thumbnails
008.jpg  
__________________
2012 Eagle 320 RLDS
2017 Ford F-250 FX4 Crew STX 6.2l
3.73 E-locker
TCNashville is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Jayco, Inc. or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 01:28 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.