2016 28' Whitehawk Superslide off center

[DJWags]

Newbie here. Looking for advice. My superslide appears to be off center. Real tight on one side and gap on the other. Both sides are exactly the same distance from the side of camper. So tight on one side that it pulls off the rubber trim around the window. Wondering if there are certain bolts I can loosen underneath the slide and just push to center? Thanks for your help in advance.

[oldmanAZ]

Welcome to the forum.

Sorry. I got nothin' related to your question, but I have a couple of questions:
Have you tried silicone spray on the window rubber trim or the slide seal?
Does the slide seal when it is all the way extended and retracted?

Hopefully someone will be along to help with your question.

[DJWags]

I use 303 on the seals. On the side that's tight, the bottom third of the seal remains tucked inward when the slide is extended and have had water leak in on the floor. On the side where it's not right, also have had rain come in. There has to be a way to center the slide. It's still under warranty but hate to have work done because things never seem to be fixed properly if that makes sense.

[robkelly]

Welcome!

It sounds like your slide needs to be adjusted, but I'm certainly not the one to explain how to do that. I'm sure others who can help will be along shortly.