Was loading up at Roaring River State Park and happened to look up in the outside storage and seen the plywood bed bottom has the screws pulling thru it. I know I weigh between 290 and 310 but come on the trailer is exactly two years and 7 days old. Is there a way to fix this? Has anyone done a mod? Appears to be 3/8 inch plywood. Looking for suggestions. I will post pictures If I need to.
BillMc
On our trailer I noticed the plywood bottom on ours is also 3/8" plywood. In the spring I am just going to replace it with 5/8" plywood to beef it up. Try looking at that option.
On our trailer I noticed the plywood bottom on ours is also 3/8" plywood. In the spring I am just going to replace it with 5/8" plywood to beef it up. Try looking at that option.
I am also thinking about taking the 3/8 plywood and making a divider for the storage area. In as muck a get another brace for the bed platform to rest on. I was hoping maybe someone had else had a fix for this problem.
BillMc
I do believe I have it repaired. Replace the 3/8 plywood with 5/8. I had to buy two sheets. I took the 3 foot by 24 and cut it to fit the pass thru storage area. Now I have to separate storage areas. More importantly I have another support for the bed platform to rest on. I was up crawling on it screwing 5/8 plywood to the piano hinge. No sag no bowing. Bought those clamps to hang brooms on and moved the broom and swifter to the new wall.
BillMc