28.5 RSTS Water pump sucking air.

Josparkz · 07-06-2022, 10:49 PM

Pretty much sums it up. Wonder if pump blew a valve. Won't hold pressure , hardly no pressure. It seems it worked . Wish I had seen that the other day, but I thought it was working, and had it in to get the new awning repaired.

bjones211 · 07-07-2022, 04:27 AM

Remove the basement wall beside the wet bay and take a look. All of 6 screws. Make sure plumbing to pump is attached. I'm sure you verified your freshwater tank is not empty...

gjkids · 07-11-2022, 12:55 PM

I had similar problem and found my inline water filter, not the blue ones, had a kink in the o ring preventing a good seal.

Marcm157 · 07-11-2022, 01:44 PM

Check for the winterization valve to be in the correct position. If it is set to winterize it will just suck air.

Yooper906 · 07-11-2022, 01:58 PM

Go with what bjones211 said. Before taking off the panel to look at the back side of the Nautilus fittings, just make sure your valves are set correctly in the water bay.

Josparkz · 07-11-2022, 04:23 PM

Quote:

Originally Posted by Marcm157

Check for the winterization valve to be in the correct position. If it is set to winterize it will just suck air.

I left the valves on "city water". Whoops.

Josparkz · 07-11-2022, 04:24 PM

Quote:

Originally Posted by Yooper906

Go with what bjones211 said. Before taking off the panel to look at the back side of the Nautilus fittings, just make sure your valves are set correctly in the water bay.

I left the valves on "city water". Whoops.