Atwood Electric Leveling System
I have read on here that some folks have had to, on occasion, hand crank their Atwood Electric Leveling System down by utilizing the hand crank. They have indicated how difficult it is to crank down the landing gear. If this every happens to you and you need to “hand crank” to lower the legs it is very easy if you disconnect the power to which ever leg(s) you want to extend or retract.
That is, unplug the connection at the mother board located in the basement of your trailer. You will see red and yellow wires connected via a quick connect. Just push the tab to open the quick connect and separate the plug from the mother board This will free up the cranking resistance and your cranking effort will be much simpler.
Hope this helps
Chande
|