|
|
03-18-2013, 08:54 AM
|
#1
|
Senior Member
Join Date: Jul 2012
Location: Greenville SC
Posts: 843
|
Awning Lighting
I have been trying to find something that is a bit unusual for awning lighting. I also wanted something that I didn't have to take down every time I rolled the awning up due to high winds and such. A fellow worker and camper suggested this that he has on his TT. He said he is always getting asked about it. He says he put it on when he got it, and has never taken it off. He attached it to the tube that the awning rolls up on, not the awning itself. He has had it for a couple of years now. Do you think that it will damage the awning in leaving it on and rolling it up inside it? He is not a very experienced camper so I am not sure if his advice is the best. Take a look and tell me what you think. http://www.amazon.com/Lycheers-Chang...I32HU6V3PCSHUR
|
|
|
03-18-2013, 04:52 PM
|
#2
|
Senior Member
Join Date: Aug 2009
Location: Dallas, Texas
Posts: 788
|
I have that light strip mounted to my awning tube. It works great. I have not noticed any damage or issue with the awning.
Go for it.
__________________
Russell
'13 Excel Winslow 34IKE
'12 GMC Sierra 3500HD
Previous RV's: '03 MobileScout Titan 29DBS; '01 Sunnybrook Lite 2708 SLE; '99 Coleman Utah
Previous TV's: '02 Chevy Suburban 2500 8.1 4.10; '99 Chevy Express 1500 5.7
|
|
|
03-18-2013, 06:53 PM
|
#3
|
Senior Member
Join Date: Sep 2010
Location: New York
Posts: 2,210
|
I have these on my awning and love them. Although the color I chose from amazon was warm white with no color changing. I hardwired to 12V with a dimmer switch for more control on nights when I want enough light to see but not take away from the campfire.
It's nice not having to put up and take down lights all the time. The one thing I did was install a plug on the end of the lights so when it rolls up they unplug themselves. They need to be plugged in again in order to work.
Total cost was about $50.00 all in. The awning does not even notice them being there upon roll up. They are only about 1/8 of an inch deep and 3/8 wide.
__________________
2014 375 BHFS Eagle Premier
2014 Ram 3500 Longhorn DRW CC
6.7 CTD, Aisin, 4.10's
Yamaha EF3000iSEB
|
|
|
03-18-2013, 07:16 PM
|
#4
|
Senior Member
Join Date: Jun 2012
Location: Southern Indiana
Posts: 1,326
|
Quote:
Originally Posted by drfife
I have that light strip mounted to my awning tube. It works great. I have not noticed any damage or issue with the awning.
Go for it.
|
Quote:
Originally Posted by 3'senough
I have these on my awning and love them. Although the color I chose from amazon was warm white with no color changing. I hardwired to 12V with a dimmer switch for more control on nights when I want enough light to see but not take away from the campfire.
It's nice not having to put up and take down lights all the time. The one thing I did was install a plug on the end of the lights so when it rolls up they unplug themselves. They need to be plugged in again in order to work.
Total cost was about $50.00 all in. The awning does not even notice them being there upon roll up. They are only about 1/8 of an inch deep and 3/8 wide.
|
Have you guys got pics on how you did this??
__________________
2017 Some Other Brand (SOB)
2013 Jayco Jay Feather X23B (She Gone)
2014 Ford Expedition
Gerard
|
|
|
03-18-2013, 07:37 PM
|
#5
|
Member
Join Date: Jul 2011
Posts: 91
|
I couldn't find where it said if they were indoor/outdoor lights. Are they made for outdoor use?
__________________
Number of Nights Camping - 2013 26RKS
2014 - 18, 2013 - 11, 2012 - 11
Number of Nights Camping - 2012 17Z
2012 - 10, 2011 - 13
Countless nights as kids and young adults in a pop-up, hardside TT and several tents!
|
|
|
03-18-2013, 07:44 PM
|
#6
|
Senior Member
Join Date: Aug 2009
Location: Dallas, Texas
Posts: 788
|
I wanted to install lights permanently to my new camper awning.
On my previous Sunnybrook I installed an 18' incandescent rope light on the awning using Awning Hook-Ups. They worked great and lasted for many years. I rolled them up in the awning. It stretched the vinyl fabric slightly, but never caused a hole or tear.
I bought an LED rope light at Wal-Mart that was supposed to be warm white. It was OK, but attracted bugs.
I read on another forum of a 16' weatherproof adhesive LED light strip. The guy claims he installed his 2 seasons ago and is working and sticking to the awning.
Following that lead I ordered the set he listed from Amazon for $39:
Amazon.com: Abco Tech®Waterproof 150 Color Changing SMD5050 LED Lighting Strip Kit RGB 16.4ft +44 Remote: Home Improvement
Similar products can be found on eBay for less.
Packaging is nice. The instructions are not.
The kit comes with a 12V control box with IR receiver. A 120V to 12V power supply, a remote control and 5m (16') of 5050 RGB Flash SMD LED with 3M adhesive backing.
I cleaned the awning tube per instructions with alcohol (rubbing not ethyl). The strip was EXACTLY the length of my awning tube, so no cutting was required. I pressed it down firmly, per instructions. And repeated several hours later. It appeared to adhere well. I secured both ends with zip ties.
Each end has a female plug, so the control box can be attached at either end. The 120v power supply plugs into the control box.
I remove the control box and power supply before retracting the awning. I can easily reach the plug with the awning deployed with a step stool. I have a Dometic 9500 electric awning.
The lights stay attached to the awning tube and roll up. The plugs just extend past the end of the awning and cause no interference to opening or closing.
I use the same light sensor I used with my old rope lights to turn the lights on at dusk and off at whatever time interval I wish they stay on.
The remote allows MANY different colors, fade, flash, dim, and a ton of things I'll never need. When on bright, they are bright! Dim is a soft glow. I can change to a yellow color if bugs are a problem.
So far, I've been impressed. Time will tell how they hold up. But for now, I'm a happy camper.
Here are a few pictures.
__________________
Russell
'13 Excel Winslow 34IKE
'12 GMC Sierra 3500HD
Previous RV's: '03 MobileScout Titan 29DBS; '01 Sunnybrook Lite 2708 SLE; '99 Coleman Utah
Previous TV's: '02 Chevy Suburban 2500 8.1 4.10; '99 Chevy Express 1500 5.7
|
|
|
03-19-2013, 06:38 AM
|
#7
|
Senior Member
Join Date: Jun 2012
Location: Southern Indiana
Posts: 1,326
|
Thank you sir!
That was very much appreciated, just what the doctor ordered!! And a very neat and clean installation too!
__________________
2017 Some Other Brand (SOB)
2013 Jayco Jay Feather X23B (She Gone)
2014 Ford Expedition
Gerard
|
|
|
03-19-2013, 06:45 AM
|
#8
|
Member
Join Date: Mar 2013
Location: Weddington, NC
Posts: 62
|
Quote:
Originally Posted by glsimms
Thank you sir!
That was very much appreciated, just what the doctor ordered!! And a very neat and clean installation too!
|
Loved the pictures so much I ordered a set of lights last night :-)
|
|
|
03-19-2013, 06:48 AM
|
#9
|
Senior Member
Join Date: Jun 2012
Location: Southern Indiana
Posts: 1,326
|
BTW, can these be cut to length? My awning is 13' on my X23B.
__________________
2017 Some Other Brand (SOB)
2013 Jayco Jay Feather X23B (She Gone)
2014 Ford Expedition
Gerard
|
|
|
03-19-2013, 07:28 AM
|
#10
|
Senior Member
Join Date: Aug 2009
Location: Dallas, Texas
Posts: 788
|
Quote:
Originally Posted by glsimms
BTW, can these be cut to length? My awning is 13' on my X23B.
|
Yes, they can be cut. The strip is clearly marked where you can cut, about every 4 inches.
__________________
Russell
'13 Excel Winslow 34IKE
'12 GMC Sierra 3500HD
Previous RV's: '03 MobileScout Titan 29DBS; '01 Sunnybrook Lite 2708 SLE; '99 Coleman Utah
Previous TV's: '02 Chevy Suburban 2500 8.1 4.10; '99 Chevy Express 1500 5.7
|
|
|
03-19-2013, 07:39 AM
|
#11
|
Senior Member
Join Date: Jun 2012
Location: Southern Indiana
Posts: 1,326
|
Thanks again! That's what I like about this site!!
__________________
2017 Some Other Brand (SOB)
2013 Jayco Jay Feather X23B (She Gone)
2014 Ford Expedition
Gerard
|
|
|
03-19-2013, 08:00 AM
|
#12
|
Senior Member
Join Date: Sep 2010
Location: New York
Posts: 2,210
|
Quote:
Originally Posted by glsimms
Have you guys got pics on how you did this??
|
The set I ordered was waterproof. There are a few verisons out there and for the extra $5.00 I went with the Amazon set since shipping was 2 day and I could return it very easily through their policies. Some of the cheaper versions only use a tube over the LED's which will lead to issues in the elements. The set I have are installed the same as above and came with 3M adhesive on the back to simply stick them on. Over the LED's is a flexible membrane that encapsulates the entire LED tape keeping it waterproof. I have not tried them yet this season but all last they worked fine.
They can be cut to length at certain 2 ft sections and I would seal them again at the cut with silicone or heat shrink tubing to prevent wicking of water down the board.
Depending on what you choose will depend on the options available. I chose the warm white option and a 12V install so I can use them on and off the grid. The wire is run down my arms and through the wall of the unit to a dimmer switch in my hanging locker. I do not have any pictures of this curently.
If they last 3-4 years I will be happy as the hanging ones seem to get that before something burns out or breaks nowadays. It's an easy replacment since the wiring is there already. I simply roll out the awning and plug in the strip.
__________________
2014 375 BHFS Eagle Premier
2014 Ram 3500 Longhorn DRW CC
6.7 CTD, Aisin, 4.10's
Yamaha EF3000iSEB
|
|
|
03-19-2013, 09:28 AM
|
#13
|
Senior Member
Join Date: Aug 2012
Location: Bridgeport, NY
Posts: 143
|
Quote:
Originally Posted by glsimms
BTW, can these be cut to length? My awning is 13' on my X23B.
|
Just the question that was in my head! I'm going to give these a try too. Love the idea of not wasting time hanging & removing awning lights on each trip.
__________________
All that is gold does not glitter,
Not all those who wander are lost.
Karen, Scott, our daughers (6 and 9), and Finley (Finn) the wonder lab.
2013 Jayco Jayfeather X23B
2001 Viking 2485ST pop up
|
|
|
03-19-2013, 10:05 AM
|
#14
|
Senior Member
Join Date: Oct 2012
Location: Camlachie
Posts: 146
|
You would have to check the individual ones that you order, but most say that you can cut them segments, usually every 3 LED without any effect.
Quote:
Originally Posted by southpaw211
Just the question that was in my head! I'm going to give these a try too. Love the idea of not wasting time hanging & removing awning lights on each trip.
|
__________________
Ron (Augie)
2015 Pinnacle 38FLSA
2013 Ram Laramie 3500 (Dually)
Curt Q20 hitch
|
|
|
03-19-2013, 04:04 PM
|
#15
|
Senior Member
Join Date: Jun 2012
Location: Southern Indiana
Posts: 1,326
|
Thanks all for the information...
And I'm with southpaw, I don't like untangling light cords, etc., when I set-up camp.
__________________
2017 Some Other Brand (SOB)
2013 Jayco Jay Feather X23B (She Gone)
2014 Ford Expedition
Gerard
|
|
|
03-19-2013, 07:59 PM
|
#16
|
Member
Join Date: Feb 2013
Location: Virginia
Posts: 83
|
Quote:
Originally Posted by drfife
I wanted to install lights permanently to my new camper awning.
On my previous Sunnybrook I installed an 18' incandescent rope light on the awning using Awning Hook-Ups. They worked great and lasted for many years. I rolled them up in the awning. It stretched the vinyl fabric slightly, but never caused a hole or tear.
I bought an LED rope light at Wal-Mart that was supposed to be warm white. It was OK, but attracted bugs.
I read on another forum of a 16' weatherproof adhesive LED light strip. The guy claims he installed his 2 seasons ago and is working and sticking to the awning.
Following that lead I ordered the set he listed from Amazon for $39:
Amazon.com: Abco Tech®Waterproof 150 Color Changing SMD5050 LED Lighting Strip Kit RGB 16.4ft +44 Remote: Home Improvement
Similar products can be found on eBay for less.
Packaging is nice. The instructions are not.
The kit comes with a 12V control box with IR receiver. A 120V to 12V power supply, a remote control and 5m (16') of 5050 RGB Flash SMD LED with 3M adhesive backing.
I cleaned the awning tube per instructions with alcohol (rubbing not ethyl). The strip was EXACTLY the length of my awning tube, so no cutting was required. I pressed it down firmly, per instructions. And repeated several hours later. It appeared to adhere well. I secured both ends with zip ties.
Each end has a female plug, so the control box can be attached at either end. The 120v power supply plugs into the control box.
I remove the control box and power supply before retracting the awning. I can easily reach the plug with the awning deployed with a step stool. I have a Dometic 9500 electric awning.
The lights stay attached to the awning tube and roll up. The plugs just extend past the end of the awning and cause no interference to opening or closing.
I use the same light sensor I used with my old rope lights to turn the lights on at dusk and off at whatever time interval I wish they stay on.
The remote allows MANY different colors, fade, flash, dim, and a ton of things I'll never need. When on bright, they are bright! Dim is a soft glow. I can change to a yellow color if bugs are a problem.
So far, I've been impressed. Time will tell how they hold up. But for now, I'm a happy camper.
Here are a few pictures.
Attachment 6914Attachment 6915Attachment 6916Attachment 6917Attachment 6918
|
Well Russell now you done it. Based on your excellent post I just bought those lights from Amazon. I'll let you guys know how the install goes after I get them
:hihi:
__________________
2010 Jayflight 29RLS
2006 Ford F-250 Superduty 6.0 diesel
Equalizer hitch
|
|
|
03-19-2013, 09:28 PM
|
#17
|
Senior Member
Join Date: Aug 2009
Location: Dallas, Texas
Posts: 788
|
I should have asked for a commission on LED strip light sales from Amazon....:hihi:
__________________
Russell
'13 Excel Winslow 34IKE
'12 GMC Sierra 3500HD
Previous RV's: '03 MobileScout Titan 29DBS; '01 Sunnybrook Lite 2708 SLE; '99 Coleman Utah
Previous TV's: '02 Chevy Suburban 2500 8.1 4.10; '99 Chevy Express 1500 5.7
|
|
|
03-19-2013, 10:38 PM
|
#18
|
Member
Join Date: May 2012
Location: British Columbia
Posts: 42
|
great thread, this is making me think I may need new lights as well. nice set up!
__________________
Dan, Nel and Jack
2013 Jay Flight 26bh - 2007 f-150 xtr 5.4
2001 kiwi 23b
1979 23.5 Okanagan class c
1973 8' Bonair pop-up
tent - not wife friendly btw
|
|
|
03-20-2013, 05:23 AM
|
#19
|
Senior Member
Join Date: Jul 2010
Location: Woodstock, Ontario
Posts: 1,029
|
Ok guys I have these on my 5er but if you mount them on the awning tube you still have to get the cord out and plug them in. What I did was mounted them on the side of the 5er just below the awning mounting rail. Then ran the cord up the awning arm bracket in the same spot as the power for the awning. Which on my 5vr runs in to one of my storage bins. Where I have a plug.so all I have to do is grab my remote. You get the same lighting either way.
__________________
Dave & Shelley GMC Ext cab Dually 4x4. Duramax Deisel.Allison trans.2010 Jayco Eagle superlite 31.5 RLDS 5er.
|
|
|
03-20-2013, 05:49 AM
|
#20
|
Senior Member
Join Date: Jun 2010
Location: South Central Ohio
Posts: 216
|
I thought about doing the same thing as hammer, but my wife wouldn't let me stick them to the side of the camper. I ended up sticking them to the awning tube, but I ran the wire up through the awning arm up onto the roof. Then I ran it over to the fridge vent and down.From there I stuck the controller on the back side of the fridge cover with the IR receiver sticking out of cover. I then picked 12-volt up from the 12-volt that supplies the fridge. These lights are such a small draw, I wasn't concerned about overloading the circuit. That way I don't have to run the converter to go from 110-12 volt and if I really want, I can have lights when not plugged into shore power. Makes it kind of nice when the power pops at the campground - that has happened to us way too many times.
__________________
Jim
1999 Silverado 1500 ECSB 4x4 5.3/3.73s
2009 Jayco 32BHDS
|
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|