Bent Out Riggers/Frame Supports

[bdreinv]

Shocked by the amount of post on this subject. Cannot remember where the majority of those threads were located.I know its old news we would have never known this is a problem for our 16 Eagle fiver. Warranty trip today. Thanks

[Rock]

They are in FW forum.

[estesbubba]

Originally Posted by bdreinv

Shocked by the amount of post on this subject. Cannot remember where the majority of those threads were located.I know its old news we would have never known this is a problem for our 16 Eagle fiver. Warranty trip today. Thanks

Welcome to the club. Our 2016 had one bend in 2016 and they replaced it with a doubled-up one. Took ours in for final warranty work and asked dealer to install some more and Jayco agreed to put in 2 more so now we have 3 of the doubled outriggers. Once they start bending your Schwintek will start to get grumpy, and once its grumpy, everyone will be grumpy.

https://www.jaycoowners.com/forums/f...lse-35795.html

[bdreinv]

Originally Posted by estesbubba

Welcome to the club. Our 2016 had one bend in 2016 and they replaced it with a doubled-up one. Took ours in for final warranty work and asked dealer to install some more and Jayco agreed to put in 2 more so now we have 3 of the doubled outriggers. Once they start bending your Schwintek will start to get grumpy, and once its grumpy, everyone will be grumpy.

https://www.jaycoowners.com/forums/f...lse-35795.html

We have 5 plastic rollers and 4 out riggers.You cannot see the bend but when you put calipers on them there definitely moving.How many rollers and out riggers do you now have? Are camper is in the shop right now! Thanks

[estesbubba]

Originally I had 3 under the slide plus 2 more just outside of it. They added 3 of the doubled ones. I also have 5 rollers under my slide.

Here are the original outriggers.



And here are the new ones.

[bdreinv]

Originally Posted by estesbubba

Originally I had 3 under the slide plus 2 more just outside of it. They added 3 of the doubled ones. I also have 5 rollers under my slide.

Here are the original outriggers.



And here are the new ones.

Thanks for pics not real fancy for sure but a big improvement.Must have been a bugger grinding the old welds off! Our son works in a CNC shop they were making triggers for AR15s last night.He wondered how a company so large could approve a part that looks like that lol.Thanks Again

[estesbubba]

They didn't replace the old ones just added new ones.

[bdreinv]

One last question what is that plate between the stock out rigger and the fabric of the slide?I do not have that plate on my 16 Eagle? Thanks

[klassic]

Here’s my fix.
They wouldn’t do all of them...just the ones that were bent at the time.
Now Schwintek not happy 😡

[estesbubba]

Originally Posted by bdreinv

One last question what is that plate between the stock out rigger and the fabric of the slide?I do not have that plate on my 16 Eagle? Thanks

They just added that and I’m guessing to raise the floor there.

[estesbubba]

Originally Posted by klassic

Here’s my fix.

They wouldn’t do all of them...just the ones that were bent at the time.

Now Schwintek not happy [emoji35]

I only had one bent 2 years ago and they only added one next to it. After showing my dealer the dropping floor a couple of months they had to work Jayco who finally agreed to add 2 more. I’m hoping that 3 of the beefed up outriggers keeps my Schwintek happy.

[Atlee]

They didn't leave that metal exposed like they, right? They did prime and paint the exposed metal at the end, and back where it's welded to the frame?

Originally Posted by estesbubba

Originally I had 3 under the slide plus 2 more just outside of it. They added 3 of the doubled ones. I also have 5 rollers under my slide.

Here are the original outriggers.



And here are the new ones.