 |
11-12-2021, 05:59 PM
|
#1
|
|
Junior Member
Join Date: Apr 2020
Location: Englewood
Posts: 6
|
Bodywork Repair
I have an 2020 Eagle 321RSTS that sustained slight bodywork damage after hitting some shredded tyre.
Dealer got the quote from Jayco today. The metal panel … $130. Unfortunately they no longer do the decal so to have it made would be ……$1200. It is 8” long, goes from 1” to a point. Is this the most expensive sticker you’ve ever heard of? Think I’ll just leave it off!
|
|
|
|
11-12-2021, 06:23 PM
|
#2
|
|
Senior Member
Join Date: Mar 2021
Location: St Johns MI
Posts: 1,200
|
Quote:
Originally Posted by Ahaw90
I have an 2020 Eagle 321RSTS that sustained slight bodywork damage after hitting some shredded tyre.
Dealer got the quote from Jayco today. The metal panel … $130. Unfortunately they no longer do the decal so to have it made would be ……$1200. It is 8” long, goes from 1” to a point. Is this the most expensive sticker you’ve ever heard of? Think I’ll just leave it off!
|
I've got some leftover decal material when my entry door was swapped on my 2020 pinnacle. Dealer ruined a decal so they ordered another and gave it to me rather than schedule to install. I cut and fit a 6"x 2" piece out of it, not sure if it's the same color. I may be able to cut a piece out of what I have. Post dimensions needed and a good pic of your color with a piece of white paper next to it.
__________________
2020 Pinnacle 32rlts
640 watts solar, 300AH lithium
2020 High Country Duramax 3500
TS3 Hitch
Ms says I'm full of useless knowledge and other stuff...
|
|
|
|
|
11-12-2021, 09:36 PM
|
#3
|
|
Junior Member
Join Date: Apr 2020
Location: Englewood
Posts: 6
|
Thanks for the offer. Its such a small decal that I was just going to get the panel repaired and leave the decal off, but I’ll send you a pic tomorrow to see if it’s a match. The original quote from Jayco was $30 for the decal, but now they say it’s obsolete!!!
|
|
|
|
|
11-12-2021, 11:39 PM
|
#4
|
|
Site Team
Join Date: Apr 2012
Location: Newark, NY
Posts: 13,952
|
A very good body shop might be able to match the color, and paint it on for you. May not be a perfect gloss match, but probably much less expensive. Just thinking out loud.
__________________
Moderator
If you're going to "regret it in the morning", sleep until noon.
2012 Jay Flight 19RD
2016 Ford F150 XLT 2X4 SC 3.5L Eco Max Tow
2010 Tundra TRD DBL Cab (Traded)
2 new fluffy Corgis, Bayley and Stanley
|
|
|
|
|
11-13-2021, 07:20 AM
|
#5
|
|
Junior Member
Join Date: Oct 2021
Location: Omaha
Posts: 17
|
I've bought decals off Ebay before, you may try looking there.
|
|
|
|
|
11-13-2021, 08:09 AM
|
#6
|
|
Senior Member
Join Date: Aug 2013
Location: Bellingham,Wa.
Posts: 6,549
|
Find a body shop with as “English Wheel “ and they can straighten that panel out for you.
__________________
2010 Jayco Hybrid EXP21M
2013 Toureg TDI
|
|
|
|
|
11-13-2021, 09:30 AM
|
#7
|
|
Senior Member
Join Date: Apr 2018
Location: Natalbany Creek Campground, Amite City, LA
Posts: 3,232
|
Go to a sign shop that makes decals and you would probably walk out with it for under $50!!
__________________
AL & JANET KRUEBBE
2019 PINNACLE 37RLWS
2018 NORTH POINT 315RLTS (TRADED)
2017 RAM 3500 DRW DIESEL/AISIN 4.10 AIR BAGS
B&W COMPANION TURN OVER BALL HITCH
Formerly from Sequim, WA
|
|
|
|
|
11-13-2021, 09:43 AM
|
#8
|
|
Member
Join Date: Oct 2021
Location: Bloomfield
Posts: 59
|
There are decals available online such as decal zone and others where you can buy rectangles/ovals etc to a specific size, then cut down as needed. Color matching may be a challenge though.
|
|
|
|
|
11-13-2021, 10:25 AM
|
#9
|
|
Senior Member
Join Date: Feb 2019
Location: Pensacola
Posts: 627
|
Find a Race Car Shop or Sheet Metal Shop and they can make that piece of metal for you. They can even make it out of Aluminum, and a good sign making shop can make that decal with no problem,,I have this kind of repair made on my Motorhome..
|
|
|
|
|
11-16-2021, 01:45 PM
|
#10
|
|
Senior Member
Join Date: Sep 2016
Location: Burleson
Posts: 509
|
$130 isn't bad for the panel but I would check with a sign/vinyl shop and they would probably give you a piece that matches.
|
|
|
|
|
11-17-2021, 04:26 PM
|
#11
|
|
Senior Member
Join Date: Sep 2016
Location: Wellington
Posts: 243
|
Had the same issue on 2018 321RSTS. Panel is reasonable but get a quote on freight as mine came in a crate! Dealer ordered decal but wrong one came. However, still was the same white with some shading flecks which I was able to trim to size if this sounds right I have quite a bit left over.
__________________
]2018 Eagle 321RSTS-sold
2021 Pinnacle 36SSWS
2020 F350 CC LB DW 6.7
1973 IH 1210 CC
1975 IH Travelall
1979 IH Scout II
[SIGPIC]
|
|
|
|
|
11-20-2021, 01:17 PM
|
#12
|
|
Senior Member
Join Date: Oct 2017
Location: Portage
Posts: 113
|
What Jflightrisk said
Quote:
Originally Posted by JFlightRisk
A very good body shop might be able to match the color, and paint it on for you. May not be a perfect gloss match, but probably much less expensive. Just thinking out loud.
|
X2
|
|
|
|
|
11-20-2021, 01:38 PM
|
#13
|
|
Senior Member
Join Date: Oct 2017
Location: Portage
Posts: 113
|
Body Shop Rates
Quote:
Originally Posted by Tunce the traveler
Find a body shop with as “English Wheel “ and they can straighten that panel out for you.
|
Average Body Shop Rates for Non-RV shops:
Average National Labor Rates
Body & Refinish $59
Frame $73
Mechanical $94
Paint & Materials $38
(Source: NABR VRS Labor Rate Survey)
It's cheaper to buy the part than repair it. You would have to pay a bodyman at least 12 hours to repair that panel @ $59 = $708 if not more. Paint would be another 3 + hours $97 P&M = $291 so you're at about $1000 to repair a $130 panel. The high cost of a decal comes from having to buy a complete side or section to get just one small piece. It stinks but that's how the decals are sold - in sets. English wheel is for making curved pieces in flat sheet metal. I can't see it working on that panel. Good luck with it!!
|
|
|
|
|
11-20-2021, 03:09 PM
|
#14
|
|
Senior Member
Join Date: Sep 2016
Location: Highlands
Posts: 594
|
Quote:
Originally Posted by AKRUEBBE
Go to a sign shop that makes decals and you would probably walk out with it for under $50!!
|
When my wife had her sign shop we helped a couple people with small stuff like that for free. Basically it's just scrap. Check a few shops I'm sure someone can fix you up for a decent price.
|
|
|
|
|
11-20-2021, 06:04 PM
|
#15
|
|
Senior Member
Join Date: Oct 2019
Location: Phoenix
Posts: 3,143
|
There are one or two shops in my area that do decals because there is such a market for them with RVs, boats, and other vehicles. In the case of the Cyclone which was a HD model, there were no longer decals available when I had the front cap redone. The paint and body shop had a local contact who came out took photos matched colors and produced 3M decals for the front cap. It can be done, and is not that expensive if there is a shop already doing that type of work.
__________________
2018 Jayco Greyhawk 29MVP
2019 Jeep Sahara Unlimited
2011 Cyclone 3010 Toy Hauler- Sold
2014 Chevy Silverado Duramax LML -Sold
|
|
|
|
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
