Double Tow Lights

[Keith]

Im going to double tow a small trailer to haul my atv. Already have welded receiver hitch to frame. Now im looking for the wire harness to wire in brake and turn lights. I found the rear marker lights and have the tail lights wired to them. Can someone who has doubke towed with their eagle tell me where to find the brake lights to tap into at the rear of the camper? Thanks

[oldmanAZ]

Welcome to the forum. I've never double towed, but there are others on this site that do.

[jal0710]

The brake lights should be with the rear lights. That's what they hooked into when they put my hitch and plug on my new FW three years ago. I don't know how to do it, but I know they work because I check them every time we get ready to take off with the boat in tow behind the FW.

[Keith]

I pulled back the under cover and found a wire loom with a white (ground) and two green wires that go to the side markers. No break/turn wires to be found. All i can figure is they are ran in the wall? Any ideas

[Clayton4971]

Keith quite often they are hard to find and a lot of people have to just run a set from the 7pin connector to the back . Another thing if you do find wires in the back is the color code is not the same.

[Clayton4971]

This might help if you do find wires ??