How to replace burned out LED ceiling lights

[shewren]

We have a 2018 Jayco Greyhawk 29mvp. One of our ceiling LED lights has burned out. I unscrewed the 3 screws and have the light fixture dangling. I plan to replace the fixture but I’m not sure what my next step should be. I don’t want to cut wires until I know what to do. Does anyone know of a video on how to replace them? I have googled it but none seem to be the same setup as ours. Thanks for any help.

[JimD]

I replaced all the lights in my rig due to a safety recall. Buy some 3M Scotchlock connectors, red ones worked fine for me. Just cut the 2 wires that go directly to the light leaving the other splice intact. Connect the new light's wires to the 2 wires that you just cut using the same wire colors - white to white, black to black.

If you wire an LED light in backwards most often it will not be damaged. It will just not light up.

[shewren]

Thank you for the info. I have ordered the replacement. When it comes in I might have a couple of more questions. Thanks again.

[HARVRS]

Can you share with me where you ordered your replacement LED lights? I have the same ones and I been to replace some but ca not find exact ones.

Thank you in advance.

[JFlightRisk]

[QUOTE=HARVRS;984459I have the same ones and I been to replace some but ca not find exact ones.[/QUOTE]

Try calling Jupiter Lighting at 800-518-4070 with that part number and ask for Janet.

[shewren]

We got it from Jupiter Lighting. They were very helpful. Jupiterledlighting.com

[HARVRS]

Thanks all for the feedback. I'll call today.