Jayco RV Owners Forum

Thread Tools Display Modes
Old 08-04-2016, 05:36 AM   #1
Junior Member
Join Date: Sep 2015
Location: Sag Harbor
Posts: 10
Levelling Jacks

I noticed that a pin above the bottom plate on one leveling jack is bent although the jack will still raise and lower. When I turn it, it gets pushed up against the piston base, then makes contact and the "jack-down alarm" shuts off as normal. I do not want to bend this pin back to a normal straight position for fear of breaking it. Is there someway to correct the bent pin or replace it? Thank you!
JosephC is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

» Virginia State Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -6. The time now is 12:37 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.