|
10-01-2015, 05:41 AM
|
#1
|
Senior Member
Join Date: Jul 2015
Location: Detroit
Posts: 294
|
Pic Request of Bumper Mount Grill
Can someone share pics of their bumper mounted grill that was installed at the factory? It would be nice to see the swing arm both extended with the grill attached and retracted for traveling.
I thought I was being smart by not ordering this option on my TT, so I could save some $$. I got a brand new companion grill for very cheap through this site from another member, and I bought this bumper mount, thinking they are universal. The issue with my TT is the ladder is mounted on the curb side, and the bottom of the ladder is only a few inches from the bumper, so this type of mount does not work.
I contacted Jayco, and they couldn't "find" a picture for me. Nice...
Thanks in advance for any assistance.
__________________
2005 Ford Excursion 6.8L, 4.56
2016 Eagle 324BHTS, P3, PP 3P
|
|
|
10-01-2015, 06:33 AM
|
#2
|
Senior Member
Join Date: Jul 2015
Location: Mid-Mi
Posts: 1,492
|
I don't have a pic, but our factory bumper grill only has a straight square tube bar that slides in the bumper mounted "grill hitch". The grill then mounts to the straight "bar". It does not have a hinge at all....
I have not mounted it on the bumper, but maybe it slides in enough for travel????
|
|
|
10-01-2015, 08:51 AM
|
#3
|
Senior Member
Join Date: Nov 2009
Location: East Bethel, Minnesota
Posts: 732
|
Not sure how much this will help you, but I found this on Jayco website.
__________________
HAPPY CAMPING!! :D
Daryl and Sandy
2013 Eagle 314BDS
2014 Ford F150 Platinum, 4 x 4 Crew Cab with Ecoboost
Equal-i-zer Hitch
|
|
|
10-01-2015, 08:59 AM
|
#4
|
Senior Member
Join Date: May 2015
Location: Charles Town
Posts: 470
|
I have this exact same grill as pictured above and it is cheaply made and I really didn't like it. I bought a Weber grill and converted it to work on my existing propane line and just set the grill on a table. It works great.
__________________
2014 Toyota TundraTRD double cab 4x4 tow package off road package 46 gallon fuel tank
2018 Jayco White Hawk 23MRB solar equipped
|
|
|
10-01-2015, 02:20 PM
|
#5
|
Senior Member
Join Date: Apr 2014
Location: Gilbert
Posts: 607
|
I would take it to a welding shop or hitch shop that does custom hitches. They should be able to cut that long arm enough to get it low enough to clear the ladder. I assume we have the same ladder setup to bumper and I have about 4-6 inches between the bottom and the bumper. Please post your solution - I am interested in that same mount.
__________________
2014 Jayco Jay Flight 32 BHDS
2015 Ford F-250 Lariat 6.7L Powerstroke 4x4
|
|
|
10-01-2015, 02:44 PM
|
#6
|
Site Team
Join Date: Jan 2011
Location: James Island, SC
Posts: 22,851
|
A few places we go, that would be in the street!
__________________
Moderator
2011- 351RLTS Eagle, MorRyde suspension/pin box,
2017- F350 6.7 PSD Lariat FX4,SRW, SB,CC
Hughes PWD SP-50A, TST TPMS
Gator roll-up bed cover
B&W Turnover ball, Companion Std hitch
Can't find what you're looking on JOF? Try Jayco Owners Forum Custom Google Search
|
|
|
10-01-2015, 02:48 PM
|
#7
|
Senior Member
Join Date: Jul 2015
Location: Detroit
Posts: 294
|
Quote:
Originally Posted by norty1
A few places we go, that would be in the street!
|
Haha, well obviously you wouldn't travel with the grill attached to it.
__________________
2005 Ford Excursion 6.8L, 4.56
2016 Eagle 324BHTS, P3, PP 3P
|
|
|
10-01-2015, 02:49 PM
|
#8
|
Senior Member
Join Date: Jul 2015
Location: Detroit
Posts: 294
|
Quote:
Originally Posted by nunyadamn
I would take it to a welding shop or hitch shop that does custom hitches. They should be able to cut that long arm enough to get it low enough to clear the ladder. I assume we have the same ladder setup to bumper and I have about 4-6 inches between the bottom and the bumper. Please post your solution - I am interested in that same mount.
|
That's about the distance; I would have to measure. Cutting it shorter may work, if only I knew a welder...
__________________
2005 Ford Excursion 6.8L, 4.56
2016 Eagle 324BHTS, P3, PP 3P
|
|
|
10-01-2015, 05:10 PM
|
#9
|
Senior Member
Join Date: Apr 2014
Location: Gilbert
Posts: 607
|
All of the hitch places around you should be able to take care of that for (guessing) less than 50$. 2 cuts, 1 weld.
__________________
2014 Jayco Jay Flight 32 BHDS
2015 Ford F-250 Lariat 6.7L Powerstroke 4x4
|
|
|
10-02-2015, 11:53 AM
|
#10
|
Senior Member
Join Date: Aug 2013
Location: Missoula, Montana
Posts: 704
|
Here are pics of mine
I'm using my tablet so this may not work. If not I'll post when home.
__________________
"I might be movin' to Montana soon..."
2020 Outdoors RV Glacier Peak Titanium
2013 Eagle 29.5RKS (traded in)
2013 Ford 6.7L diesel F350
|
|
|
10-03-2015, 07:54 AM
|
#11
|
Senior Member
Join Date: Jul 2015
Location: Detroit
Posts: 294
|
Thanks Cosmic, that helps. But you need to wash that trailer! [emoji3]
__________________
2005 Ford Excursion 6.8L, 4.56
2016 Eagle 324BHTS, P3, PP 3P
|
|
|
10-03-2015, 09:20 AM
|
#12
|
Senior Member
Join Date: Aug 2013
Location: Missoula, Montana
Posts: 704
|
It's 41 degrees and raining. Maybe later. You should see my truck.
__________________
"I might be movin' to Montana soon..."
2020 Outdoors RV Glacier Peak Titanium
2013 Eagle 29.5RKS (traded in)
2013 Ford 6.7L diesel F350
|
|
|
10-03-2015, 11:18 AM
|
#13
|
Senior Member
Join Date: Nov 2014
Location: Florien, LA
Posts: 1,872
|
Jason, that's how it was mounted on the right side of the bumper. Of course I moved the mount to the other side, hacked the square tubing and reused it for a water filter mount. The other piece I sent was for the other style mounting. The grill could be mounted either way. Wall mount on track, that other style hanger you had showed me, or on the 2 pegs / bar mount.
__________________
John and Rebecca Dickson
Emma-13 / Little John-10 / Iva-7
2013 Ford F-350 Lariat FX4, CC LB PSD, DRW
2015 Jayco Jay Flight 28BHBE (#8)
|
|
|
10-03-2015, 12:52 PM
|
#14
|
Senior Member
Join Date: Oct 2014
Location: SF Bay Area
Posts: 327
|
We have that exact grill and it works fine. I would say it is lightweight instead of cheap. And yes, I would order it again. That's always one of the first questions I ask when getting someone's opinion about a product or service.
Ken
__________________
"We're all here because...we're not all here"
2015 White Hawk 25BHS w/Outdoor Kitchen
2015 GMC Sierra SLT 2500HD Z71 4x4 Duramax
1985 Coleman Sequoia Tent Trailer
|
|
|
10-03-2015, 02:33 PM
|
#15
|
Senior Member
Join Date: Jul 2015
Location: Detroit
Posts: 294
|
Quote:
Originally Posted by Cosmik Debris
It's 41 degrees and raining. Maybe later. You should see my truck.
|
You must be with me at Hocking Hills, OH! lol
__________________
2005 Ford Excursion 6.8L, 4.56
2016 Eagle 324BHTS, P3, PP 3P
|
|
|
10-06-2015, 05:36 AM
|
#16
|
Senior Member
Join Date: Jul 2015
Location: Detroit
Posts: 294
|
Quote:
Originally Posted by BigJohnD
Jason, that's how it was mounted on the right side of the bumper. Of course I moved the mount to the other side, hacked the square tubing and reused it for a water filter mount. The other piece I sent was for the other style mounting. The grill could be mounted either way. Wall mount on track, that other style hanger you had showed me, or on the 2 pegs / bar mount.
|
Just saw your comment, John. Thanks for sending the other mount, but I don't have the rails on the side to mount, and I don't plan to drill holes into my new trailer any time soon! LOL Plus with the curb side slide along with the outside kitchen, there's not a convenient place to mount it on the side. It would be perfect on the rear bumper, to go along with the outdoor kitchen, if I can only get this mount to work.
__________________
2005 Ford Excursion 6.8L, 4.56
2016 Eagle 324BHTS, P3, PP 3P
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|