Slide seals

[PaulB12]

Just an observation.......
While applying 303 protectant to slide seals I noticed this:
One pic shows slide closed, sealed nicely, the other shows slide partially open/closed.
Not a big deal because when either fully open or closed it seals as it should.
Now the problem arises when closing the slide and it has rained the seal/squeegee doesn't squeegee the slide topper!! Wife said she noticed water on floor between pulled in slide and fridge! Vinyl floor so again no big deal.
I refuse to get a slide topper for the usual reasons on the pro and con side of issue. So now I'll have be more vigilant about blowing off leaves AND water.
As stated above , just an observation and maybe a heads-up.

PaulB12

[triplebvalp]

A few well placed strips of Velcro on the top of the slide will ensure the seal(s) fold and unfold properly.

[TWP723]

The seals around the slides aren't designed to "squeegee" water off the slides, they're mainly for sealing the slide while it's out. I always sweep my slides before retracting them, especially after getting rain.