T handle on black tank drain

[Rwollfy233]

My plastic handle on 28.5rsts broke this morning . Does anybody know if it is glued or threaded on ???

[Screwby]

Mine are pinned in place with a small roll pin that goes through the shaft. I had a pin rust out and had to replace it this Spring. Easy to do with some patience and a small punch.

[Grumpy]

Originally Posted by Screwby

Mine are pinned in place with a small roll pin that goes through the shaft.

Or thread, definitely not glued.

[Screwby]

Originally Posted by Grumpy

Or thread, definitely not glued.

Mine are pinned in place on a threaded shaft so they can fold for some reason. You swivel them into place and then there’s a small nut behind them on the shaft that you spin out to lock the handle into position. Once I got them into place I never folded them back since we owned it. Weird design

[norty1]

We learned the hard way to put your fingers next to the shaft when pulling those valves.

Mine are screwed on and they are readily available online or at a rv supply.

[Jagiven]

Originally Posted by norty1

We learned the hard way to put your fingers next to the shaft when pulling those valves.

Mine are screwed on and they are readily available online or at a rv supply.

X2, mine came off on me, I installed a Jam nut to lock it in place.

What year is your TT?

[norty1]

Originally Posted by Jagiven

X2

What year is your TT?

2011, see sig

[Jagiven]

Originally Posted by norty1

2011, see sig

LOL, I meant for the OP, what year is his TT. I noticed people have commented about different handle mounting technologies (roll pins and threaded)