Thomas Payne or Stacy Stewart emblem removal.

[Mikayles]

Any ideas on removing the clear plastic branding on the theater seating. It was hot where we camped and they were sticking to our legs. Looks like the are plastic welded on. Was goin to just pull them off but afraid I will rip the seams .

[AKRUEBBE]

Originally Posted by Mikayles

Any ideas on removing the clear plastic branding on the theater seating. It was hot where we camped and they were sticking to our legs. Looks like the are plastic welded on. Was goin to just pull them off but afraid I will rip the seams .

It ridiculous the was they put those things on. I used a box cutter with a very sharp blade and carefully cut the edges. It's easier to slice it down the middle length wise to give it some slack.

[RipinSC]

x2. I cut down the center then pulled the plastic up as I carefully cut along the edge with a box cutter. It trims off easily. Be very careful. Why the heck do they put them on any way?

[Mikayles]

I'll try that next time out. It's a lippert thing I guess... Thanks guys!!

[Mershon]

I used a pair of sharp rounded tip scissors.

[ARoamer]

Cut the bottom off carefully and use a blow dryer to carefully heat and pull it off at the top stitching. Medical hemostats help get the small pieces if any are left.

[Marcm157]

Mine are still on despite the DW begging me to get them off. I am not afraid, just lazy...