TV mount

[Silverheel]

Hi! I am a new owner of a 2021 224BH. It came with a tv mount installed inside near the bed and outside under the awning. I also got the rectangular plate (used for switch locations) that supposedly would fit a tv, but it doesn't. Is there an adapter plate that does fit the tv (100 X 100 screw pattern) that then is affixed to the plate provided by Jayco, so that it can then be used with the existing mount?! I know that sounds confusing, but I thought that if anyone else had faced this issue, it would make more sense! Much Appreciated!!

[michael.g]

Sorry, I am not familiar with the plate from Jayco. Is it just a smaller Vesa pattern, like 75x75? If so, there are adapters like this that will work.

-Michael

[Silverheel]

Thanks, Michael! The plate that came with the TT is much bigger than the 100X100 screw pattern on the television. I'm not sure exactly what number the screw pattern on it is. Someone on another forum said that it was to fit the Furion tv. I'm betting that Amazon will have a fix for this, I just have to keep looking, or just set the tv up on the table and watch it there! Not a big deal.

[GregandKelly]

Does the mount on the wall look like this?

If so, they offer multiple options. Our 2019 Whitehawk 27RB came with this mount, and we ended up installing the mount to the tv offset and had to drill 2 new holes to line up with our 32" Samsung TV.

Good luck!


https://www.lw-eng.com/categories/9/TV-Brackets

[CPCole]

I have one of those on the outside of mine, too and was wondering what it's for.

[Mikayles]

Dont know if this will help but these guys have mounts for just about anything. Our fifth wheel has one in the bedroom from them.

https://shop.ramco-eng.com/ Look under Moview.

[GregandKelly]

They also have other accessories, including a garbage bag holder and small table.

https://www.lw-eng.com/categories/1/KeBloc-Products