Might try spraying the track with white litheum grease.
Might also try some plumbers joint compound to keep those traps from working loose.
Kind of like lock-tite.
Also, if the ring ijn the bottom is spinning, it needs to be tightened too.
It screw into a piece on the bottom side to sandwich the sink bottom.
Again, use some teflon tape or joint compound.
I put the handle part of pliers into strainer while holding bottom piece to tighten.
D.
__________________
Cape Coral, Florida
2021 Toyota Tundra SR5, 5.7 V8
2022 Jayco 240RBS
|