Only one side of the hydraulic jacks on our Northpoint keep leaking off. This is set up at a permanent site. Any ideas why only one side would leak off?
Could be a valve on the pump valve body, o ring bad or dirt. IIRC there are 6, find the one that runs the right side.
A leak possibly, but I'd think the oil would be quite noticable. Check oil level. If low, look for red oil at hoses, connections, cylinders.
Could be a valve on the pump valve body, o ring bad or dirt. IIRC there are 6, find the one that runs the right side.
A leak possibly, but I'd think the oil would be quite noticable. Check oil level. If low, look for red oil at hoses, connections, cylinders.