|
|
07-16-2019, 12:10 PM
|
#7221
|
Senior Member
Join Date: Dec 2017
Location: Nor Cal
Posts: 3,116
|
Hammered in the pin that fell out of the bottom of a hinge in one of the kitchen cabinets made by Jayco’s “Amish craftsman.” Luckily DW caught it before it went down the sink. Checked all the other hinges to make sure they weren’t working their way out too.
__________________
2018 JayFlight SLX 212QBW
1999 Ford F-250 Super Duty Lariat SC, 7.3L PSD, 3.73
Transfer Flow 50 gal aux; Andersen WDH; Prodigy P2
😁 "If a man says he’ll fix something, he will. There’s no need to remind him every 6 months.
|
|
|
07-16-2019, 12:21 PM
|
#7222
|
Senior Member
Join Date: Sep 2013
Location: South Texas
Posts: 7,216
|
Installed Sumo Spring bump stop replacements in the front of the MH. Also installed a Hellwig front sway bar, but got to the last bolt and stripped it.
And things were going SO well on this install. I guess I should've expected it; things NEVER go that smooth for me...
And of course, I didn't have the tools on hand to do anything about it, so now I get to spend ANOTHER day laying on the hot driveway working on this. Luckily it should only take a few minutes to fix it and button things up. Then I can go for a test run, and hook up my Grand Cherokee and go for test run with that in dinghy mode.
__________________
-2018 Greyhawk 29MV
-2020 Jeep Wrangler Unlimited (JLU) (Primary Toad)
-1994 Jeep Wrangler YJ (Secondary Toad)
-2014 Jay Flight 28BHBE & Ram 2500 6.4L CC 4x4 (sold)
|
|
|
07-16-2019, 06:04 PM
|
#7223
|
Member
Join Date: May 2018
Location: PNW
Posts: 67
|
4 new sets of Brake assemblies installed, Bearings cleaned, greased and new seals installed. We leave in 5 days for the Black hills.
__________________
2020 Ford F350 XLT 4x4 SCLB, FX4, 6.7 Diesel
2021 NorthWood Nash 29S, OTG, Solar
2014 Ford F150 XLT 4x4 HD, SCLB, 5.0 373 SOLD
2011 Jayco Jay Flight 28BHS SOLD
|
|
|
07-16-2019, 09:17 PM
|
#7224
|
Site Team
Join Date: Apr 2012
Location: Newark, NY
Posts: 15,926
|
It was such a nice, albeit hot day, I gave it a bath. All the little black streaks are gone. Spotless!....Half an hour later, the sky opened up, and dumped 3" of rain.....spots! (Sigh)
__________________
Moderator
Think you're too old to cry or swear out loud...walk into your hitch in the dark.
2012 Jay Flight 19RD
2016 Ford F150 XLT 2X4 SC 3.5L Eco Max Tow
2010 Tundra TRD DBL Cab (Traded)
2 new fluffy Corgis, Bayley and Stanley
|
|
|
07-16-2019, 11:02 PM
|
#7225
|
Member
Join Date: Jan 2019
Location: Oceanside
Posts: 47
|
Replaced 5 self tapping screws that stripped out on the aluminum edging on the ramp with 5 RivNuts and bolts. Replaced 12 volt cigarette lighter plug with USB charger plug.
|
|
|
07-17-2019, 02:34 PM
|
#7226
|
Senior Member
Join Date: May 2018
Location: Hemet
Posts: 294
|
More and more upgrades
Removed couch seat bottom and removed all hog rings to re-upholster with same material we did to our dinette seat cushions
|
|
|
07-18-2019, 05:21 PM
|
#7227
|
Senior Member
Join Date: Nov 2013
Location: Duxbury
Posts: 7,113
|
Added LED light strips behind the control panel. The Jayco emblem doesn’t show very well, but the backing behind it is black vs. the white that’s behind all of the labels.
__________________
Rob & Kelly, Bella & Brady (Miniature Schnauzers)
2022 Eagle HT 28.5RSTS
2017 RAM 3500 SRW CTD/AISIN CC LB
|
|
|
07-18-2019, 05:45 PM
|
#7228
|
Senior Member
Join Date: Jan 2010
Location: Wisconsin
Posts: 7,401
|
Nice job on backlighting your control panel, that looks really cool!
|
|
|
07-18-2019, 07:55 PM
|
#7229
|
Senior Member
Join Date: May 2017
Location: Sweetwater
Posts: 731
|
Quote:
Originally Posted by robkelly
Added LED light strips behind the control panel. The Jayco emblem doesn’t show very well, but the backing behind it is black vs. the white that’s behind all of the labels.
|
Yeah, that looks great. Very useful mod indeed!
__________________
- Jeff
2017 Jay Flight 32BHDS
2006 GMC 2500HD Classic CC SB 4x4 6.6L Duramax/Allison
|
|
|
07-19-2019, 10:16 AM
|
#7230
|
Senior Member
Join Date: Apr 2019
Location: North Vancouver
Posts: 130
|
Installed a MaxxAir II on the main vent of my 174BH. I used the black one to help cut out the morning light which wakes up the kids. We'll give it it's trial run this weekend camping in Bellingham at The Cedars.
This is a temporary location as it will be moved to the bathroom vent and a MaxxAir Maxxfan installed in it's place
|
|
|
07-20-2019, 07:19 AM
|
#7231
|
Junior Member
Join Date: Jul 2018
Location: Hedgesville
Posts: 23
|
Any directions of how you did this?
|
|
|
07-20-2019, 07:26 AM
|
#7232
|
Senior Member
Join Date: Dec 2018
Location: Rehoboth Beach
Posts: 182
|
Some type of Class C we think. Just the 2 of us so nothing big.
Mike
__________________
Mike
2014 Jayco Flight 26BH
2015 GMC Sierra SLE V8 4x4
|
|
|
07-20-2019, 10:39 AM
|
#7233
|
Senior Member
Join Date: Jan 2015
Location: DFW
Posts: 3,493
|
Had the motherboard for the LCI 3.0 leveling system replaced yesterday...all good today!
__________________
Dan
'24 GMC 2500 AT4X AEV Edition
|
|
|
07-22-2019, 11:33 AM
|
#7234
|
Senior Member
Join Date: Apr 2019
Location: North Vancouver
Posts: 130
|
Quote:
Originally Posted by distracto
Installed a MaxxAir II on the main vent of my 174BH. I used the black one to help cut out the morning light which wakes up the kids. We'll give it it's trial run this weekend camping in Bellingham at The Cedars.
This is a temporary location as it will be moved to the bathroom vent and a MaxxAir Maxxfan installed in it's place
|
Quote:
Originally Posted by Festor
Any directions of how you did this?
|
If this question was meant for me, it was actually very simple. You just bolt it to your existing 14x14 vent frame, no drilling into your roof or disturbing seals. One side is hinged so you can flip it up to clean anything out or check vent seals later on. Instructions come taped to the vent for easy reference.
It keeps the trailer dark in the mornings, but as my wife pointed out, it cuts a lot of light out in the daytime so when boondocking/dry camping, we may have to use the lights to brighten things up in there at times. If I can figure out how to add a ladder to the 174BH I could simply flip the hinge to allow daylight in.
Cheers
|
|
|
07-22-2019, 12:05 PM
|
#7235
|
Senior Member
Join Date: May 2018
Location: Hemet
Posts: 294
|
Cannot wait for our two maxxair 2 vent cover in black are to be install sometime this week while they install LCI leveling jacks, slide topper and solar kit too
|
|
|
07-24-2019, 03:49 PM
|
#7236
|
Junior Member
Join Date: Aug 2018
Location: toledo
Posts: 6
|
I put a matching dimmer switch in to control the awning light. A touch dimmer. $20 and about 15 minutes to do it.
|
|
|
07-24-2019, 03:56 PM
|
#7237
|
Senior Member
Join Date: Feb 2016
Location: Abilene
Posts: 579
|
Screened the refrigerator side vent.
Dang ol' mud daubers got a start, but they're SOL now.
|
|
|
07-24-2019, 04:09 PM
|
#7238
|
Senior Member
Join Date: Jan 2015
Location: DFW
Posts: 3,493
|
What Did You Do To Your Jayco TODAY?
Pulled her from Santa Rosa Beach, FL to Vicksburg, MS...time to go to the casino & see if I can win some gas money to get back home!
__________________
Dan
'24 GMC 2500 AT4X AEV Edition
|
|
|
07-24-2019, 04:16 PM
|
#7239
|
Senior Member
Join Date: Oct 2016
Location: McCalla, AL
Posts: 1,228
|
Good day for a drive. Pulled her to Pine Mountain GA from Gulf Shores today.
|
|
|
07-24-2019, 04:20 PM
|
#7240
|
Junior Member
Join Date: Jul 2019
Location: Sparks
Posts: 6
|
Only hit my head ONE time on the awning support during last two day trip. Wife was amazed.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|