|
05-10-2017, 10:06 AM
|
#1
|
Senior Member
Join Date: Oct 2014
Location: Lower Alabama (LA)
Posts: 2,010
|
Easy way to clean grates
First this is not my idea - I read of it, tried it, and give it my seal of approval. YMMV.
I use my propane Weber several times per week, generally very hot searing/ cooking things with sauces (BBQ?). The nature of my style often leaves a hard build up of cooked on crud.
I've spent untold amount of energy scraping/ chipping away on them; otherwise the open areas close up and then the flame runs out of oxygen (a necessary component of fire). Then I read of an easy solution: Place the grate into your home oven and set it to the clean cycle.
Last evening I gave my primary grate a quick scraping and then followed the directions. My oven clean cycle runs three hours on then another full hour cooling down. At the end of it I removed the still too hot to touch grate. It was all ashen gray.
Once cool enough to touch I placed it in the sink to rinse it off and oh-boy, it was nearly spotless. The few remaining "chips" were loose and hosed off. The next morning I found a couple of additional chips but they flecked off with a simple probing.
__________________
former 2008 Jayco Eagle 29.5 RLS
former 2014 F250 6.7 4X4, CC LB
|
|
|
05-10-2017, 10:11 AM
|
#2
|
Senior Member
Join Date: Oct 2014
Location: Lower Alabama (LA)
Posts: 2,010
|
On to step two, seasoning the grate. Another article suggested (once clean) rubbing it with cooking oil (I used a cooking type of paint brush) then baking it in the oven at 450* for 30 min. As they implied three applications work better than one that's what I did.
I don't remember them suggesting doing this to both sides - but I did just to be complete. It sure is shiney now and hopefully it'll last a lifetime (not likely).
One big tip, I'm sure glad momma was away as I made quite a mess. Next time I'll do this oiling over butcher paper and line the oven floor with tin-foil.
__________________
former 2008 Jayco Eagle 29.5 RLS
former 2014 F250 6.7 4X4, CC LB
|
|
|
05-10-2017, 10:59 AM
|
#3
|
Senior Member
Join Date: Apr 2011
Location: AZ, SSA (Squabbling States of America)
Posts: 1,432
|
I always cleaned the grate and interior of my propane grills by just turning the flames up full blast for a while after I finished cooking and removed the food. Before everything completely cooled off, I just took a wire brush to the grate while still in place, then, once everything had cooled down to just warm, I removed the grate and wiped out the interior with a damp paper towel (I like the blue paper shop towels for that). If the grill had a window, I wiped the inside of the window off with a slightly damp paper towel before turning the grill into a blast furnace.
__________________
Jeannie
|
|
|
05-10-2017, 12:08 PM
|
#4
|
Senior Member
Join Date: Oct 2014
Location: Lower Alabama (LA)
Posts: 2,010
|
For many years that's how I "cleaned mine" - but it's also how I wound up with lots of extra hard crusts developing.
My grill thermometer indicates the heat tops out at 420-425* whereas my oven exceeds 500*; maybe that's the difference? Or maybe it was the 4 hour cycle?
I'll still preheat to those temps (principally to sterilize the grill) but when it calls for better cleaning it will now go to the oven.
__________________
former 2008 Jayco Eagle 29.5 RLS
former 2014 F250 6.7 4X4, CC LB
|
|
|
05-12-2017, 03:10 PM
|
#5
|
Senior Member
Join Date: Jan 2011
Location: Arizona City
Posts: 10,161
|
Quote:
Originally Posted by Lady Fitzgerald
I always cleaned the grate and interior of my propane grills by just turning the flames up full blast for a while after I finished cooking and removed the food. Before everything completely cooled off, I just took a wire brush to the grate while still in place, then, once everything had cooled down to just warm, I removed the grate and wiped out the interior with a damp paper towel (I like the blue paper shop towels for that). If the grill had a window, I wiped the inside of the window off with a slightly damp paper towel before turning the grill into a blast furnace.
|
x2
__________________
2018 Jayco Jayfeather 27 RL, 2002 Ford excursion, v-10, 3:73 gears 4x4 mine. 2020 Buick Encore Hers, Retired Air Force, now Retired.
|
|
|
05-12-2017, 04:15 PM
|
#6
|
Senior Member
Join Date: Jul 2014
Posts: 957
|
I use my weber (converted to NG) 2-3x's/week, and just let it heat up for 10 min or so when I'm ready to cook, then scrape the grates with a wire bbq brush from WM, then cook my food, and turn it off. Repeat the next time I cook. I do take the grates out 2 or 3 times a year to clean them good, and to scrape all the grease residue out of the fire box.
__________________
'08 Greyhawk 31SS Traded in
2018 MR2410RL
Goodyear Endurance
Equalizer WDH
TV 2018 F150 FX4 SC 3.5EB TP/MT
|
|
|
05-12-2017, 05:33 PM
|
#7
|
Senior Member
Join Date: Feb 2012
Location: San Antonio
Posts: 377
|
For those who may have a newer oven in their home with electrical compents.
I had to my main control board and a few other things replaced in my oven. A few months later I had the same problem and had to have the same repairs. The second repair man asked if I had used the "Self cleaning" setting. I told him I did. He stated never to use the "self cleaning" cycle. He stated that the temps get so hot they start burning the wires and any electrical components in the oven/stove. That was a few years ago. I have not used the "self cleaning" cycle and have not had a needed repairs.
__________________
2022 F250 6.2L 4.30 Lariat Crew Cab
2017 Jayco Jay flight 28BHBE
Equalizer 14K Brand WDH (2.5" Shank)
2013 Jayco Jay Flight 26BH (Sold)
CMSgt USAF (Ret)
"GO BLUE". University of Michigan
|
|
|
05-12-2017, 11:27 PM
|
#8
|
Senior Member
Join Date: Oct 2014
Location: Lower Alabama (LA)
Posts: 2,010
|
I suppose there may be a difference in ovens (mine is now a 10 year old Kenmore Elite oven) but I've used my oven cleaning cycle at least monthly and it continues to work very well.
And as I said, in my case heating the grill on high hasn't been successful in cleaning off all the baked on crud. This method, for me, has worked. YMMV.
__________________
former 2008 Jayco Eagle 29.5 RLS
former 2014 F250 6.7 4X4, CC LB
|
|
|
05-13-2017, 06:40 AM
|
#9
|
Senior Member
Join Date: Jan 2016
Location: Magnolia
Posts: 4,841
|
Quote:
Originally Posted by Wrascal
First this is not my idea - I read of it, tried it, and give it my seal of approval. YMMV.
I use my propane Weber several times per week, generally very hot searing/ cooking things with sauces (BBQ?). The nature of my style often leaves a hard build up of cooked on crud.
I've spent untold amount of energy scraping/ chipping away on them; otherwise the open areas close up and then the flame runs out of oxygen (a necessary component of fire). Then I read of an easy solution: Place the grate into your home oven and set it to the clean cycle.
Last evening I gave my primary grate a quick scraping and then followed the directions. My oven clean cycle runs three hours on then another full hour cooling down. At the end of it I removed the still too hot to touch grate. It was all ashen gray.
Once cool enough to touch I placed it in the sink to rinse it off and oh-boy, it was nearly spotless. The few remaining "chips" were loose and hosed off. The next morning I found a couple of additional chips but they flecked off with a simple probing.
|
This method is what I use to restore old cast iron pans.
Sent from my iPhone using Tapatalk
__________________
2016 North Point 377 RLBH, with a few mods, disc brakes, shocks, Sailun g rated tires, wet bolts
2014 Ford F350 Platinum sold
2017 Ford F350 Lariat, CC, 6.7PSD, DRW, Trailer Saver BD3 hitch
|
|
|
05-13-2017, 07:01 AM
|
#10
|
Senior Member
Join Date: Jul 2014
Location: Silver Spring, MD
Posts: 1,804
|
Quote:
Originally Posted by Magnolia Tom
This method is what I use to restore old cast iron pans.
Sent from my iPhone using Tapatalk
|
Yup, me too. Something else that works is tossing them into a nice hot campfire (works for cast iron pans at least).
|
|
|
05-14-2017, 07:08 AM
|
#11
|
Senior Member
Join Date: Sep 2010
Location: New York
Posts: 2,210
|
I just restored my Webber grill and easy off oven cleaner is very effective at removing the built up carbon. Wire brush, razor blade and scraper all work very well.
My SS grates were rusted out and replaced them for the first time with the enameled cast iron set. This is my 3rd set in 15 years and the best I have owned to keep clean to date. Season with some oil and brush clean after cooking and so far they are pretty clean. They also cook very well, vs SS or the steel that came with them.
I do use the oven cleaning method for my sheet pans though and it is effective for sure.
__________________
2014 375 BHFS Eagle Premier
2014 Ram 3500 Longhorn DRW CC
6.7 CTD, Aisin, 4.10's
Yamaha EF3000iSEB
|
|
|
05-14-2017, 09:24 AM
|
#12
|
Senior Member
Join Date: Aug 2015
Location: Ottawa, ON
Posts: 1,963
|
Quote:
Originally Posted by Explorer03
For those who may have a newer oven in their home with electrical compents.
I had to my main control board and a few other things replaced in my oven. A few months later I had the same problem and had to have the same repairs. The second repair man asked if I had used the "Self cleaning" setting. I told him I did. He stated never to use the "self cleaning" cycle. He stated that the temps get so hot they start burning the wires and any electrical components in the oven/stove. That was a few years ago. I have not used the "self cleaning" cycle and have not had a needed repairs.
|
That's just poor design. Wasn't brand named Jayco was it?
My trick for grills is a bit different. If it isn't completely carbonized on, I put them just offshore in shallow water in the lake. By morning the little fishies have scoured the grills clean.
__________________
2011 Jayco X19H (purchased 2015)
2008 Jayco 1007 PUP (purchased new, traded for the X19)
2018 Nissan Titan Midnight Ed.
|
|
|
05-14-2017, 09:34 AM
|
#13
|
Senior Member
Join Date: Sep 2015
Location: North Greenbush, NY
Posts: 752
|
Had an "old-timer" share this method with me, and I didn't believe it, until I tried it....
Spray your grills with oven cleaner, then place them on grass overnight. Don't ask me the science behind how/why this works, but something about the grass, the cleaner, and the morning dew, and they are MUCH easier to clean. I rinse them well, then just a little elbow grease gets them clean.
__________________
Be Safe, and Everyone Goes Home,
Rick
2014 RAM Laramie 2500 w/6.7L Cummins Diesel and Automated Safety Hitch
2016 377RLBH Jayco North Point
300W of Suntech Solar w/Rogue MPPT Controller & Xantrex 2000W PSW Inverter
|
|
|
05-14-2017, 10:07 AM
|
#14
|
Senior Member
Join Date: Feb 2012
Posts: 968
|
Quote:
Originally Posted by bankr63
That's just poor design. Wasn't brand named Jayco was it?
My trick for grills is a bit different. If it isn't completely carbonized on, I put them just offshore in shallow water in the lake. By morning the little fishies have scoured the grills clean.
|
Do you camp on the banks of the Amazon River in Brazil...and are those little fishies Piranha?
|
|
|
05-14-2017, 09:35 PM
|
#15
|
Senior Member
Join Date: Oct 2014
Location: Lower Alabama (LA)
Posts: 2,010
|
I've often used oven cleaner spray and it does a fair job inside the fire bucket but it didn't do much for my built up crud on the grates.
In fairness, I've never tried it in the grass; with this new option I likely won't be trying it.
__________________
former 2008 Jayco Eagle 29.5 RLS
former 2014 F250 6.7 4X4, CC LB
|
|
|
05-17-2017, 05:52 PM
|
#16
|
Senior Member
Join Date: Oct 2014
Location: Lower Alabama (LA)
Posts: 2,010
|
Yesterday I decided it was time to replace the burner on the same grill; while 100% physically solid many of the gas openings were clogged up. In the past I've run a pin thru them and had fairly good success - but the last time I did this it felt like there was debris on the inside of the burner.
Then I decided if I was gonna toss it anyways why not try the previously explained procedure, the Oven Cleaner method. Once completely cooked/ cooled off I flushed water thru the tube, reinstalled it and lite the fire. It took awhile for the heat to dry it completely out but eventually all the burner holes had flame. So while not 100% sure it'd work in every case I believe it worked for me. YMMV.
I cancelled my burner order.
__________________
former 2008 Jayco Eagle 29.5 RLS
former 2014 F250 6.7 4X4, CC LB
|
|
|
05-17-2017, 06:09 PM
|
#17
|
Senior Member
Join Date: Sep 2010
Location: New York
Posts: 2,210
|
I used a fine wire brush, oven cleaner and brillo to get my gas tubes back up to snuff. If it's less than 10 years old Webber will send you a new set FOC under warranty. I got my last set that way.
__________________
2014 375 BHFS Eagle Premier
2014 Ram 3500 Longhorn DRW CC
6.7 CTD, Aisin, 4.10's
Yamaha EF3000iSEB
|
|
|
05-17-2017, 07:31 PM
|
#18
|
Senior Member
Join Date: Oct 2014
Location: Lower Alabama (LA)
Posts: 2,010
|
What is "FOC under warranty"? And does it cover my problem - clogged holes? The tube itself was solid - in my opinion there was no problem with its quality - rather user error by allowing juices/sauces to leak thru the grates and harden.
I've previously scraped it, steel wool'd it, and once gently used a file; oh yes it also has been hit with oven cleaner. I can free up the exterior but "inside" the holes get plugged/ need to be poked thru. As they were getting difficult to breach I decided to replace it.
Then Plan B was tried, and so far so good.
__________________
former 2008 Jayco Eagle 29.5 RLS
former 2014 F250 6.7 4X4, CC LB
|
|
|
05-18-2017, 05:36 AM
|
#19
|
Senior Member
Join Date: Sep 2010
Location: New York
Posts: 2,210
|
No pictures required, tell them the are failing. "FOC" Free of Charge.
The tubes come out pretty simply once you get the manifold off. Then all the debris will fall right out the big gas line in side. Mine is a 4 tube setup with 3 being the main and one smaller one being the tie line.
__________________
2014 375 BHFS Eagle Premier
2014 Ram 3500 Longhorn DRW CC
6.7 CTD, Aisin, 4.10's
Yamaha EF3000iSEB
|
|
|
07-08-2017, 07:32 AM
|
#20
|
Senior Member
Join Date: Apr 2017
Location: Port coquitlam
Posts: 150
|
Put tin foil over top of the grates and turn bbq up to high and let it burn for a while. It cuts the area you are trying to heat in half and also helps clean the fire box portion of the bbq. It has always worked well for me. CHEERS!
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|