2010 Recon Electrical Issue

[grizzlander]

I have a 2010 Recon 40D.
While on generator power everything works fine but when on shore power everything that gets fed from the second leg does not work. I am assuming that the transfer switch is bad and was wondering if anyone knows where it is located in my RV.
Thanks

[JimD]

Are you sure both legs are good at the pedestal? Each leg has its own breaker so if you haven't tried resetting them it is worth a shot.

Transfer switch is indeed where you want to check next. They hide those things everywhere. Mine is under the bed (Greyhawk).

[Grumpy]

Originally Posted by grizzlander

I have a 2010 Recon 40D.
While on generator power everything works fine but when on shore power everything that gets fed from the second leg does not work. I am assuming that the transfer switch is bad and was wondering if anyone knows where it is located in my RV.
Thanks

Is your geny in the front? If so look behind the back wall in the basement storage.

[grizzlander]

Originally Posted by JimD

Are you sure both legs are good at the pedestal? Each leg has its own breaker so if you haven't tried resetting them it is worth a shot.

Transfer switch is indeed where you want to check next. They hide those things everywhere. Mine is under the bed (Greyhawk).

Yes both legs are good at the pedestal.

[grizzlander]

Originally Posted by Grumpy

Is your geny in the front? If so look behind the back wall in the basement storage.

Yes generator is in front.