2015 Jayco Seismic 3914

[blemer]

I have an error that reads "bad calibration" on my leveling system. Can anyone let me know how to fix this issue and how difficult to raise and lower manually?

Thanks Ben

[Loboclone]

Originally Posted by blemer

I have an error that reads "bad calibration" on my leveling system. Can anyone let me know how to fix this issue and how difficult to raise and lower manually?

Thanks Ben

You have Ground Control 2.0? If so I have never seen "bad Calibration" message. lord knows I have see everything else with this Lippert brain trust system.........

[P25ct]

Originally Posted by blemer

I have an error that reads "bad calibration" on my leveling system. Can anyone let me know how to fix this issue and how difficult to raise and lower manually?



Thanks Ben

So here's what I have for you as a 2014 3914 owner, previously:

First unless they changed the design they installed the rear jacks so you can't get a crank in them. Mine were turned and installed with crank facing a frame rail. Yup. Worthless.

Cranking is not advised unless absolutely dire straits and have to. If you saw the mechanism inside you'd understand why.

Never saw it don't recall reading about that message. I've read plenty of manufacturers documents on the system. Maybe try a new calibration just to make it happy so you can raise the jacks?

I'd call the dealer.

3914 is a great floorplan. Timeless I would say. Let us know how you make out.