2020 Seismic 4113 Outside TV

[brentalight]

Does anyone know how to gain access to the back of the exterior TV on a Seismic 4113? I want to be able to plug a Roku into the HDMI port. Think they are on the back of the TV and I can figure out how to get the tv off the mount to access it.

[Kmo]

same issue here, I know on the inside TV's there is a little strap you pull down and they simply un clip and you can rotate them out but that outside TV doesn't see to have that.

[brentalight]

I should have updated this post. I figured it out on the last trip. The tv is mounted flat against the wall in the compartment. You can get to the mounting screws with a long Phillips screwdriver. I unhooked and lowered the compartment hatch to make accessing the lower screws easier. Once the screws were out I simply leaned the tv forward and had my wife plug in an HDMI cord.

[Kmo]

Thanks, I will give that a whirl.

[h3is3m2n]

Yes that is correct, fun putting them back in, wifes small hands helped

[Seismic4113]

You have to unscrew mount from the wall