Jayco RV Owners Forum
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 04-16-2018, 12:47 PM   #1
Senior Member
 
theracqueteer's Avatar
 
Join Date: Dec 2016
Location: Middletown
Posts: 193
Cargo bunk upper limit adjustment

Is there a way to adjust the upper limit on the cargo bunks? Currently on my bunk, when I raise both to the top limit I can not get the stow pins in on the drivers side of the top bunk unless I lower about 1/2" or more. If I do that I am not able to get the pins pins in on the passenger side unless I raise it some more. Of course if I go through all that to get the pins in, I have to go through the reverse procedure to pull them to be able to lower. I can't find anything in the literature to address adjustment.
__________________

__________________
2017 Jayco Seismic 4113
2016 Silverado 3500HD 4x4 Duramax
theracqueteer is offline   Reply With Quote
Old 04-16-2018, 12:57 PM   #2
Senior Member
 
farnik78's Avatar
 
Join Date: Apr 2016
Location: Snyder
Posts: 337
I actually push up on mine to get the pins in.
__________________

__________________
2015 Octane T31B
2008 Dodge Ram SLT 2500
6.7L Cummins
6 Speed Manual
farnik78 is offline   Reply With Quote
Old 04-16-2018, 03:33 PM   #3
Member
 
Join Date: Sep 2016
Location: Coldwater
Posts: 42
I have the same issue and have to push up on one side about a 1/2". I did look at the upper limit switch however it appears to be in a fixed position and is non adjustable. This is on my list of "to do's" for further investigation this year. From what I see if the rails are not attached to the wall at exactly the same height one side or the other will not be even. It looks like it may be necessary to remove the limit switch and drill 2 new holes or elongate the existing ones either higher or lower depending on ones situation to correct the problem. Perhaps someone else has a fix already?
Wilsonbryk is offline   Reply With Quote
Old 04-16-2018, 05:40 PM   #4
Senior Member
 
theracqueteer's Avatar
 
Join Date: Dec 2016
Location: Middletown
Posts: 193
Measurements on the rails checked out OK. I thought about just drilling two new holes for the pins on the drivers side but, would rather adjust if possible. I have to take it to the dealer next week for some other work so, if I can't fix it before then, I will see if they can do it under warranty.
__________________
2017 Jayco Seismic 4113
2016 Silverado 3500HD 4x4 Duramax
theracqueteer is offline   Reply With Quote
Old 04-16-2018, 07:38 PM   #5
Senior Member
 
Join Date: Jan 2015
Location: London
Posts: 100
I had to lift mine into place as well on one side. I also drilled new holes down a few inches because I had the bedding wrap around the cross shaft one time as I pinned the upper and lowered the bottom bunk, that was a PITA to unwind......

Ross..
__________________
2015 Ram 3500 CTD SRW, Aisin, Longhorn Edition
2011 Octane T26Y
RoscoW is offline   Reply With Quote
Old 04-20-2018, 10:45 PM   #6
Junior Member
 
Join Date: Apr 2017
Location: SAN Jose
Posts: 16
Hi
Had the same problems took it back to the dealer, dealer says thereís no way to adjust it. I contacted happy jack and they sent a email with instructions. With pictures Iím going to try it this weekend
Rklingborg is offline   Reply With Quote
Old 08-01-2018, 11:02 AM   #7
Member
 
Join Date: Jul 2018
Location: Black Jack
Posts: 64
I'm looking at drilling the holes about 9" lower. A little easier to get the back ones and it will allow the 3rd a/c to circulate alot better.
__________________

CHV_FRK is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Jayco, Inc. or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 11:40 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.
×