I had my VTX1300 cruiser strapped down in the cargo area. After just a 3 1/2hr drive, the floor had a bubble under front tire. Anyone ever experience that? I should have put a mat down under the tires. I should be able to inject some glue and stick it back down.
I had my VTX1300 cruiser strapped down in the cargo area. After just a 3 1/2hr drive, the floor had a bubble under front tire. Anyone ever experience that? I should have put a mat down under the tires. I should be able to inject some glue and stick it back down.
How are you strapping down the bike? I use wheel chock stands. If the floor is bubbled up then maybe try a flat weighted down board over that spot for a few hot days to level it out.
__________________
-
-
2019 SuperDuty CCSB 6.2 Gasser 4X4
2019 Jayco Octane 222 SL
2016 HD Dyna S and 2019 HD Softail Slim
Typically they dont glue the floors down anymore, its a floating floor just stapled at the edges under the walls. Take a hair dryer to it to get some heat into it, dont get it to hot and it may shrink back into place. I sure would not strap anything down directly on that floor