LCI fuse location on 2017 Seismic Wave 355w

[hogjockey74]

We think we might have blown a fuse when using the LCI auto level. During a retract, we lost all power to the box. The fuse is not located in the normal fuse panel inside the camper. Anyone know of a separate fuse location for the LCI? OR any other tricks to try and restore the power? It's Sunday, so we are in a jam since place are closed.

[Bama]

Check the ceiling in the front storage compartment. That's were they are in my Eagle Fifth Wheel.

[SocalSeismic]

the jack control box would power off during leveling on my 2017 355w. ended up being the 50 amp circuit breaker coming right off the batteries. replaced it with a manual reset 80 amp circuit breaker and that fixed it.

[Sassy]

The level up control panel is powered thru the front compartment control module located in front compartment up high

There is a single Red wire that comes from battery to control module.. Look for inline fuse holder on that red wire usually near battery And see if it’s blown

Also reseat single red wire on front control module and if issue still persists remove control panel display and disconnect cable and reconnect

The 50 amp resettable breaker is only for power to dua polarity solenoid on Hyde pump motor and has nothing to do with power to actual control panel display