Made from a 5” plastic fence post and a gutter that fits inside.
Now all fittings fit inside and no need to disassemble hose.
Two aluminum doors hinged on 5 inch post and assy hung from 1/4 inch threaded rod
I also use 5" fence post but 2 of them next to each other.
I don't trust end caps, so what I did was just drill a cross
hole and inserted long bolts with nylock nuts. I can then use
either end of the holders.
I used large, I think 3/8" bolts. I always use grade 8 bolts, cost a little
more but do not rust.
That way the hoses dry out and the hoses cannot come out.