Party deck brackets

[JTH]

I have been searching an looking for the brackets which bolt to the gating that are used to hold it up. The one I bought has 2 of the 4 broken or bent and no one seems to know what or where to get these.

Any thoughts ??

[Grumpy]

Originally Posted by JTH

I have been searching an looking for the brackets which bolt to the gating that are used to hold it up. The one I bought has 2 of the 4 broken or bent and no one seems to know what or where to get these.

Any thoughts ??

Did you look here?

https://www.jaycorvparts.com/

Also try Lippert.

[JTH]

Yes. No luck there either

[AZMarine]

If door made by Challenger Door (now owned by Lippert). Contact them. I got the party deck steps that did not come with mine from them.

About Challenger Door | Lipperthttps://www.lci1.com › challenger-door
challenger door from www.lci1.com
Challenger Door. Doors & Concession Windows. Hours: Monday – Friday 7:00am – 4:00pm EDT (Closed Saturday and Sunday). Main: 574-773-8100.

I'd like info on your 3 season door if you can share it with me.

[KarenwithGeorge]

Ditto to @AZMarine question on the 3 season door. Why in the world are these so hard to get for Jayco TH's? I found out (like hundreds of others) that you can't direct order from Lippert, so my hubz built one. It worked great for our last outing, but in the Texas heat and humidity situation we are still working out the air-tightness. Jayco could make a killing if they'd just manufacture some sort of bolt in unit that can be removed for TH'ing.

[JTH]

Here is the only identifying sticker on this door setup.

[AZMarine]

JTH,
Thank you for getting the label. I was able to go to the Lippert web site & found their 3 season door. Issue I would have (looking at the install documents) is that the frame is mounted 9" in from the ramp to allow closure w/ the deck gates. I have the two happy-jack bed riser frames right there. And when closed the deck railings are only 1" , or less , away from the beds. This is probably why Jayco provided a pull down screen (which has to be all the way up when closing the ramp door), but not a 3 season door option (not enough room).

The only way I could see putting one in would be to unbolt & move the Happy Jack bed assembly deeper into the camper. But I am sure there would not be the wall supports needed. As I have found out when mounting other items to the wall where the drawings said a support was / is,, NOT....

Or I could remove the railings each time, as the 3 season door would go in the "space" where the current deck rails are when folded. I would also have to figure out where to store the side railings when not in use & traveling. Just not worth the effort either way for the gain.

I did see where Morryde has an inflatable "room" for the party deck that can be sealed off, opened up , etc. Nice idea, but not sure of the long term (over the years) reliability for the the cost.