Routing satellite for tv

[Seismic Owners]

Hi all, dealing with an issue in our 2017 Seismic 4113. We have the tailgaotor for dish, can't seem to get it to work with the factory wiring of the cables. We run it through the window straight to the box, then to the living room tvs, but can't seem to get all TV's to get that signal. Any ideas??

[DonaandDon]

Seams no two satellites are the same except one common factor. The manual will tell you your limitations. Norm; Tailgaters do not like cable splitters. RV's have several splitters in them. If you have only one out put from your tailgater? Then you will view one TV.

Look thru your manual to see if they explain how to jumper the RV connection for using the outside fitting. Norm; we pass the cable wire thru the window. Either the standard cable or using a "Flat wire connector", it will provide the best picture. Other than that, if using a Tailgater run your own wiring for it.

Good Luck..

[Seismic Owners]

Thank you donaanddon, as we all know the "manuals" aren't always helpful, but I will take the time to go over it.