2021 jayco prestige 36h levelling question

[ianpemb]

I have a vega touch mira control system with the equalizer levelling system. Above the megatouch screen there is a label that says level rv before and after the slide outs are extended. What is the best procedure for doing this? I get the before slide outs are extended, I just hit auto level. Do i just hit auto level again after the slide outs are extended? or is there another way that i should be doing this?

[Barkie123]

My experience with the auto leveler is that it gets you close but never exact. I usually tweak mine after the auto level manually to bring it home. I think you may not always have to relevel after your slide outs are deployed. If you think your level may be off because your rig has settled I would just adjust manually to bring back to level.
However whatever works best for you after you experiment a little.

[ianpemb]

No, I was just asking because of the warning sticker above the control panel saying to level before and after the slides have been deployed. It lloks like the warning label was factyory installed.

[johnsat]

I usually just auto-level, deploy slides then hit auto-level again. Most of the time I need to manually tweak the setting to keep the a/c condensate from running down right above the entry door.

[ianpemb]

thanks ill try that