Adding a Pedestal table to the cockpit of my 2015 precept

[Dbrown]

I'm adding a Pedestal table between the front 2 seats in the cockpit and was wondering how far back from the edge of the doghouse is your table on the new Precepts that have one already mounted to the floor?

[Vicr]

I've done that MOD and can give you dimensions when I get home from work. One thing to watch out for is there is a an aluminum square tube channel that is just off center of the table location to either miss or remove some of the aluminum.

[Dbrown]

Vicr,
The mount I have will screw into the floor flush with the carpet. Does your mount recess into the floor?

[Vicr]

Yes I have the flush mount, I didn't want a hump. I can post photos's and get you measurements today.

[Vicr]

[Dbrown]

Vicr,
Thanks that would be helpful!

[Vicr]

My photo's disappeared.

[NickM]

Following

[MikeThompson]

Vicr has that new stealth model table 😂. I have a 2018 and the factory table base is 1 3/4" from the edge of the doghouse.

[Dbrown]

Mike,
What dia. Is your table top. I first bought a 24" but it was too big. So I down sized to an 18".

[MikeThompson]

Mine is 20 1/2" square.

[Dbrown]

Vicr,
Nice pics I can imagine what it looks like. ��

[Dbrown]

Thanks Mike,
Does your pedestal cam lock into the floor base and then a collar tightens down on it?

[MikeThompson]

Originally Posted by Dbrown

Thanks Mike,
Does your pedestal cam lock into the floor base and then a collar tightens down on it?

Yes, it does. The base is made by Sequoia. At least that's what's stamped on it. It's a surface mount. Nothing through the floor except the mounting screws.

[Dbrown]

Mike,
That is the same one I bought at camping world for $55. Then a 18" wood table top from Menards $7. I still need need to stain and finish it. I will post pics when I'm done.

[Dbrown]

Originally Posted by Vicr

I've done that MOD and can give you dimensions when I get home from work. One thing to watch out for is there is a an aluminum square tube channel that is just off center of the table location to either miss or remove some of the aluminum.

Vicr,
Is your your watch out for if the pedestal base went through the subfloor?

[dgantz]

Originally Posted by Dbrown

I'm adding a Pedestal table between the front 2 seats in the cockpit and was wondering how far back from the edge of the doghouse is your table on the new Precepts that have one already mounted to the floor?

Edge to edge is 3/4", 2018 Precept 36T