Alante 27A water pump replacement

[Mike1952]

My water pump has been acting up and finally gave up working and needs to be replaced. After some research I found it located in the wet bay above the water filter, very difficult to access. Can anybody help me with some advice on reaching the pump for replacement? Can I remove the wet bay cabinet? There's no way I can access it from underneath the panel.

[Big1]

Welcome to JOF! I just traded my 5th wheel, and my furnace went out, so I had to replace the sail switch and guess what, you guess it, yep, I had to remove the whole panel in the wet bay. My old body wasn't meant for the way I had to get in there and take out the whole furnace, I had to replace 6 pipes going to the furnace. So in other words you might have to.

[Parrott]

Had the same issue on my Precept. After removing it, I relocated it for easy access.

[Mike1952]

Originally Posted by Parrott

Had the same issue on my Precept. After removing it, I relocated it for easy access.

Thanks for your response. Getting access to it is my problem. I removed the 8 screws holding the wet bay in place, but that doesn't allow much access to the pump. Is that the best I can do?