Auto gen start.

[TexTx]

Can anyone let me know what volts auto gen start is at on this panel. There is no indicator on the grey knob. Is it the line.? I'm not sure

[craigav]

You can't tell just by the image. You need to rotate the "Starts Volts DC" to determine if it is set at 11.5 or off. If you want to set it, fully rotate it counter clockwise, note where off is at on the knob, rotate the knob clockwise to the desired voltage.

As a tip, I have worked with many controls that had similar knobs, it was common to put a dot of bright red paint (or nail polish) on the knob to better indicate where it is set at. ~CA

[TexTx]

Ok good idea now the highest it goes is 12 on my last coach it needed 12.1 or 12.2 to start it 12500 onan diesel Thx for your repl
It was also a different pane lighted magnum.

[TexTx]

Craig Thank You very much.