Bathroom Cabinet Shelf

[Jump]

The bathroom cabinet shelves in our Alante 29S seemed a bit too far apart, wasting space. (In my opinion) I built another shelf to hold smaller items which we previously stacked on top of the items on the bottom shelf.


I'm pleased with how it came out. We now have plenty of room for items big and small.


Jump

[Grumpy]

Looks like a job well done...

[Jump]

Thanks Grumpy.


J-B Weld did the job again!


Jump

[Marcm157]

Nice work! You used JB Weld to hold shelves in place???

[Jump]

Originally Posted by Marcm157

Nice work! You used JB Weld to hold shelves in place???

Thanks!



Yes, I used that rather than screw into the wall. I used quarter round for the braces which is holding very well. The hardest part was keeping the braces in place on the wall until the J-B Weld hardened. I put bottom and side pressure braces on the pieces.


I should have cleaned up the excess J-B Weld before it hardened but I was able to cover most of it!


For the little bit of weight on the shelves I think this will do fine.


Jump

[Marcm157]

Originally Posted by Jump

Thanks!



Yes, I used that rather than screw into the wall. I used quarter round for the braces which is holding very well. The hardest part was keeping the braces in place on the wall until the J-B Weld hardened. I put bottom and side pressure braces on the pieces.


I should have cleaned up the excess J-B Weld before it hardened but I was able to cover most of it!


For the little bit of weight on the shelves I think this will do fine.


Jump

Good idea - I never thought of using JB in that type of situation...