Decorative Lug Nuts with Internal Nut

[Barkie123]

I am missing a decorative lug nut for my 22.5 inch wheels.
It is the one with the line engraved that is removable with the T-Bar wrench. These nuts hold the decorative hub cap in place.

Anyone know the part number?

[Kevin Cooper]

This is what I purchased for our Alante. It takes a 1-1/8” wrench to remove these. That might help you check yours. May be the same.
https://a.co/d/240s8JZ

[Barkie123]

Thank you Kevin
I just measured my lug cap and it will take a 1 5/8 socket to fit.
Both the cap and threads have to match so it makes finding a match difficult.

[Kevin Cooper]

This may be the ones you are looking for. At least that is what it implies.
Hopefully correct.
https://a.co/d/5kSywfE

[Barkie123]

That will work for the decorative lug. I may have to find a nut to attach the cover.
At least I’m a step closer. Thanks again.

[Kevin Cooper]

They are called wheel simulator nuts. I believe that Amazon has one for a lug that is 7/8”- 14 tpi. But I can’t 100% verify that size. Link https://a.co/d/0phJgpK.
It amazes me how they are very protective of this information. A pain in the butt to figure out.
Etrailer might be your best bet. You can contact them, and they can lead you in the right direction.
Here is another option you can contact. https://www.phoenixusa.com/simulator...s=14m!%23-!324

[Barkie123]

I found a winner!

https://rveliteparts.com/products/re...t-chrome-cover

This fits my 22.5 inch decorative wheel simulator hub.

[Kevin Cooper]

Very happy you found them! Amazes me how proud they are of a nut and SS cap. I’m too old, I guess! I’m thinking when I was young, you could get solid steel chromed lug nuts for all four wheels of a cat for less than one of these. Oh well, now your “simulator” (wheel cover) will stay on!