Garmin Fusion RV-BBT600 Series, Gimme Back My Rear Camera

[AlwaysDreaming]

Just Purchased a 2018 Alante 26X. It has Garmin Fusion RV-BBT600 Series “Infotainment” system where the 3 (Driver side, Passenger side, and Rear) Cameras are displayed. When I put the coach in reverse the rear camera comes is displayed, turn signals and the respective camera is displayed.
While driving down the interstate with the rear camera displayed, and I put on the turn signal to pass the respective camera is displayed, as you would expect.

The problem is, when the turn signal is turned back off the display appears to flash the rear camera then no camera is displayed, it goes to the home menu. Pressing the camera icon while completing a pass of a semi will get the rear camera back sometimes. But it is a hellava time to be fussing with the buttons, plus I get the pleasure of the piercing “keep your eyes on the road” for my lovely copilot. I really like driving with the rear camera displayed all the time. In fact, it is essential.

Question: Anybody else experience this issue and could you correct it? Is there a software update?

This is my first post, thanks for taking time to read it
AlwaysDreaming (of a rear camera that stays displayed)

[Cryn]

Need to check for software updates, and you need to update the base unit as well as the remote. You can get the manuals from Garman on line and download them, but you'll also need to register the unit to you to check for available updates.

[AlwaysDreaming]

Originally Posted by Cryn

Need to check for software updates, and you need to update the base unit as well as the remote. You can get the manuals from Garman on line and download them, but you'll also need to register the unit to you to check for available updates.

Thank you. I did update both base and remote/display with version 3.6 and it fixed the issue.
Some specifics:
You can check your SW Level under Music -> Setting -> About, 3.6 is the latest off the net.
You need a 2.0 USB Drive > 4GB
You need a micro USB Cable
You need a PC with USB
You need time since the remote download includes North America Maps as well as the SW update

Thanks for the Reply