Jayco Precept macerator

[rdesimone5461]

Does anyone know where the fuse, or relay for the Theford Sani flow 700 macerator is? We have a 2017 precept 35S.

[Palms]

Very interested in finding out about this as well. We also have a 2017 35S and on this trip the macerator stopped working. I called Jayco and they couldn’t provide any information. They did send me a copy of the manual. Went to the Tampa supershow hoping I could find either a Sanicon or Jayco rep but none available. Will be following this thread closely. Have been draining through the macerator hose without the pump and seems to work well so far. Any suggestions and/or observations would be very welcome.

[rdesimone5461]

I just bought my 2018. This RV was barely used. I think it sat a lot. The macerator hose was all cracked. When I went to replace it. I found the wires to the Macerator were corroded. Only one wire was connected. The manual doesn’t show anything on the wiring. The wires are right under the pump. Would you be able to get a picture of it? There is 3 wires from the RV (black, white & grey) and 4 wires from the pump (black, white, and 2 purple. The black is labeled +, the white goes directly to ground. If I can get mine fixed, I might be able to help you. You can text me directly (727)267-4069.

[Palms]

Raining on a sandy/muddy lot. Expect to be home this Saturday and will crawl under and get pics.

[rdesimone5461]

That will be great!

[rdesimone5461]

Hi, I was able to get the wiring diagram for the Sanicon 700. I repaired the wiring, and my macerator is now working. I found a local RV repair place, that was able to call Theford the get the diagram. I would check the wiring under the macerator. Mine was not protected, it is now. Let me know if I can help.

[Vicr]

Where is the fuse?

[rdesimone5461]

I never found the fuse. I just repaired the wires, and it worked.

[Palms]

Mine is in storage again and will take pics and share this weekend.